{
 "$schema": "https://aij.eddy3d.com/api/schemas/case.schema.json",
 "schema_version": "2.6.0",
 "data_version": "7ee0afb7cec8197e7edde0e7c282c8e6e9670b7cef003e6aa218c5a536817f48",
 "license": "CC-BY-4.0",
 "id": "A",
 "slug": "case-a",
 "title": "Case A — 1:1:2 building",
 "summary": "Isolated 1:1:2 building, velocity field (split-fibre hot wire).",
 "configuration": {
  "building": "1:1:2 (width : depth : height) prism",
  "b_m": 0.08,
  "H_m": 0.16,
  "Re_H": 24000,
  "U_H_m_s": 4.491,
  "wind_directions_deg": [
   0
  ],
  "measurement_planes": [
   "vertical centre plane y/b = 0",
   "horizontal z/b = 0.125",
   "horizontal z/b = 1.25"
  ],
  "instrument": "hot-wire anemometer, split-fibre probes (DANTEC 55R55 streamwise, 55R57 spanwise/vertical), 1000 Hz, 60 s per point, 500 Hz low-pass",
  "tunnel": "Technical Research Institute, Shimizu Corporation, Tokyo",
  "scale_note": "model scale; Eddy3D solves it at 1:100 (b = 8 m, H = 16 m) with the tunnel velocities"
 },
 "configurations": [
  {
   "config": "default",
   "wind_direction_deg": 0.0,
   "points": 186
  }
 ],
 "quantities": [
  "U",
  "V",
  "W",
  "uu",
  "vv",
  "ww",
  "k"
 ],
 "units": {
  "length": "m (model scale)",
  "velocity": "m/s",
  "variance": "m^2/s^2",
  "k": "m^2/s^2"
 },
 "frame": {
  "origin": "building centre on the ground plane",
  "x": "+x streamwise (the wind at WD = 0 blows toward +x); building spans x in [-0.04, 0.04]",
  "y": "+y lateral; building spans y in [-0.04, 0.04]; points published on the y <= 0 half by the tunnel's symmetry convention",
  "z": "+z up from the ground; roof at z = 0.16",
  "lateral_sign_applied": 1,
  "coordinate_scale_applied": 1.0
 },
 "inflow_fit": {
  "method": "log law, kappa = 0.41, least squares over z = 0.02 ... 2H on the case's own approach-flow file",
  "u_star_m_s": 0.343,
  "z0_mm": 0.668,
  "U_H_measured_m_s": 4.491,
  "log_law_error_at_H": "+2.0 %"
 },
 "approach_flow": {
  "source": "raw/cases/case-a/AF_caseA.csv",
  "units": {
   "z": "m",
   "U": "m/s",
   "k": "m^2/s^2",
   "u_rms": "m/s"
  },
  "rows": [
   {
    "z": 0.005,
    "U": 2.745,
    "k": 0.372,
    "u_rms": 0.663
   },
   {
    "z": 0.01,
    "U": 2.935,
    "k": 0.4,
    "u_rms": 0.669
   },
   {
    "z": 0.02,
    "U": 3.175,
    "k": 0.437,
    "u_rms": 0.687
   },
   {
    "z": 0.04,
    "U": 3.435,
    "k": 0.492,
    "u_rms": 0.717
   },
   {
    "z": 0.06,
    "U": 3.627,
    "k": 0.538,
    "u_rms": 0.749
   },
   {
    "z": 0.08,
    "U": 3.824,
    "k": 0.574,
    "u_rms": 0.777
   },
   {
    "z": 0.1,
    "U": 4.021,
    "k": 0.585,
    "u_rms": 0.766
   },
   {
    "z": 0.12,
    "U": 4.21,
    "k": 0.627,
    "u_rms": 0.799
   },
   {
    "z": 0.14,
    "U": 4.362,
    "k": 0.635,
    "u_rms": 0.793
   },
   {
    "z": 0.16,
    "U": 4.491,
    "k": 0.652,
    "u_rms": 0.807
   },
   {
    "z": 0.165,
    "U": 4.502,
    "k": 0.643,
    "u_rms": 0.798
   },
   {
    "z": 0.17,
    "U": 4.586,
    "k": 0.657,
    "u_rms": 0.813
   },
   {
    "z": 0.18,
    "U": 4.606,
    "k": 0.65,
    "u_rms": 0.799
   },
   {
    "z": 0.19,
    "U": 4.712,
    "k": 0.659,
    "u_rms": 0.808
   },
   {
    "z": 0.21,
    "U": 4.854,
    "k": 0.661,
    "u_rms": 0.806
   },
   {
    "z": 0.23,
    "U": 4.993,
    "k": 0.651,
    "u_rms": 0.795
   },
   {
    "z": 0.25,
    "U": 5.132,
    "k": 0.626,
    "u_rms": 0.784
   },
   {
    "z": 0.3,
    "U": 5.449,
    "k": 0.593,
    "u_rms": 0.767
   },
   {
    "z": 0.35,
    "U": 5.782,
    "k": 0.521,
    "u_rms": 0.725
   },
   {
    "z": 0.4,
    "U": 6.077,
    "k": 0.434,
    "u_rms": 0.663
   },
   {
    "z": 0.45,
    "U": 6.338,
    "k": 0.352,
    "u_rms": 0.594
   },
   {
    "z": 0.5,
    "U": 6.588,
    "k": 0.254,
    "u_rms": 0.496
   },
   {
    "z": 0.55,
    "U": 6.693,
    "k": 0.175,
    "u_rms": 0.402
   },
   {
    "z": 0.6,
    "U": 6.751,
    "k": 0.106,
    "u_rms": 0.307
   }
  ],
  "csv": {
   "url": "https://aij.eddy3d.com/api/cases/A/approach_flow.csv?v=2f3b37fa8e43",
   "path": "cases/A/approach_flow.csv",
   "media_type": "text/csv",
   "bytes": 557,
   "sha256": "2f3b37fa8e43e307e807a5114bf2a8b2ad3ea6396cb17d6adc112663b69ea19f"
  }
 },
 "inflow": {
  "benchmark_data": {
   "approach_flow_csv": {
    "url": "https://aij.eddy3d.com/api/cases/A/approach_flow.csv?v=2f3b37fa8e43",
    "path": "cases/A/approach_flow.csv",
    "media_type": "text/csv",
    "bytes": 557,
    "sha256": "2f3b37fa8e43e307e807a5114bf2a8b2ad3ea6396cb17d6adc112663b69ea19f"
   },
   "columns": [
    "z",
    "U",
    "k",
    "u_rms"
   ],
   "units": {
    "z": "m",
    "U": "m/s",
    "k": "m^2/s^2",
    "u_rms": "m/s"
   },
   "rows": 24,
   "fit": {
    "method": "log law, kappa = 0.41, least squares over z = 0.02 ... 2H on the case's own approach-flow file",
    "u_star_m_s": 0.343,
    "z0_mm": 0.668,
    "U_H_measured_m_s": 4.491,
    "log_law_error_at_H": "+2.0 %"
   },
   "note": "the measured profile and the fit of it are the benchmark's data as cleaned here; everything under `recommended` is a choice"
  },
  "recommended": {
   "status": "RECOMMENDED by this repository (not part of the benchmark): a log-law inlet fitted to the case's own approach-flow file, with k and epsilon from the standard neutral ABL relations. Any inlet may be submitted; say which in submission.yaml",
   "profile": "U(z) = u*/kappa ln((z + z0)/z0); k = u*^2 / sqrt(Cmu); epsilon = u*^3 / (kappa (z + z0))",
   "u_star_m_s": 0.343,
   "z0_m": 0.0006680000000000001,
   "kappa": 0.41,
   "Cmu": 0.09,
   "k_m2_s2": 0.3921633333333334,
   "fit": "log law, kappa = 0.41, least squares over z = 0.02 ... 2H on the case's own approach-flow file",
   "U_ref_m_s": 4.491,
   "z_ref_m": 0.16,
   "openfoam": "atmBoundaryLayerInletVelocity / atmBoundaryLayerInletK / atmBoundaryLayerInletEpsilon with Uref, Zref, z0 and d = 0; nutkAtmRoughWallFunction with the same z0 on the ground: cases/{id}/inflow_openfoam.txt holds them"
  },
  "flow_direction": {
   "convention": "along_x",
   "meaning": "+x is along the wind at WD = 0: flowDir (1 0 0); another WD rotates it about +z by the case's rotation sense (frame.wind_direction_rotation)",
   "wind_directions_deg": [
    0.0
   ]
  },
  "eddy3d_runs": [
   {
    "run_id": "A.openfoam12-realizableKE",
    "engine": "openfoam12-realizableKE",
    "scale": 100
   },
   {
    "run_id": "A.openlb",
    "engine": "openlb",
    "inflow": "log law U_H = 4.491 m/s at 16 m, z0 = 0.0668 m (the OpenFOAM fixtures' fit of AF_caseA.csv)",
    "scale": 100,
    "latticeCells": 1303800,
    "cellsPerHeight": 10
   },
   {
    "run_id": "A.fluidx3d",
    "engine": "fluidx3d",
    "inflow": {
     "Uh": 4.491,
     "z0": 0.000668,
     "uStar": 0.3360888268931647,
     "fit": "AF_caseA.csv, z = 0.02-0.30 m (16 points): u* = 0.3427 m/s, z0 = 0.668 mm; profile anchored through the measured U_H"
    },
    "scale": "model (1:1), H = 0.16 m, identity frame: U=U_x, V=U_y, W=U_z"
   },
   {
    "run_id": "A.ml-surrogate",
    "engine": "ml-surrogate",
    "scale": 180
   }
  ],
  "domain": "the extents, blockage and cell sizes of Eddy3D's domains are not in its snapshots and are not stated here; mesh.cells and the scale are, where the snapshot has them"
 },
 "points": {
  "url": "https://aij.eddy3d.com/api/cases/A/points.json",
  "csv": {
   "url": "https://aij.eddy3d.com/api/cases/A/points.csv?v=a46201996b22",
   "path": "cases/A/points.csv",
   "media_type": "text/csv",
   "bytes": 19729,
   "sha256": "a46201996b22620e9ceae7ac558d8bafc44f3ac3ed7073c2efca70bc57ad5239"
  },
  "source": "clean/cases/A/points.csv",
  "rows": 186,
  "distinct_points": 186,
  "columns": [
   "point_id",
   "config",
   "instrument",
   "wind_direction_deg",
   "x",
   "y",
   "z",
   "U",
   "V",
   "W",
   "uu",
   "vv",
   "ww",
   "k",
   "campaign"
  ],
  "counts": {
   "config": {
    "default": 186
   },
   "instrument": {
    "split_fibre": 186
   },
   "wind_direction_deg": {
    "0.0": 186
   }
  },
  "nulls": {},
  "bbox_min": [
   -0.06,
   -0.16,
   0.01
  ],
  "bbox_max": [
   0.26,
   0.0,
   0.28
  ]
 },
 "probes": {
  "csv": {
   "url": "https://aij.eddy3d.com/api/cases/A/probes.csv?v=b2a57394ad1d",
   "path": "cases/A/probes.csv",
   "media_type": "text/csv",
   "bytes": 11673,
   "sha256": "b2a57394ad1dbf36499f3248c3348ce666434bbb3715675b6ed0e1d5db81f3d6"
  },
  "rows": 186,
  "columns": [
   "point_id",
   "config",
   "campaign",
   "instrument",
   "run",
   "wind_direction_deg",
   "x",
   "y",
   "z",
   "scored_as"
  ],
  "columns_meaning": "the key columns of a scored file (point_id with config, campaign, instrument, run and wind_direction_deg as the case has them), x, y, z in m (case frame), and scored_as: the families the row is scored in (vector, k, thermistor_bracket, concentration, theta, joined by +)"
 },
 "scoring": {
  "U_ref_m_s": 4.491,
  "U_ref_meaning": "U_H, the approach speed at the building height H = 0.16 m",
  "theta": null,
  "scored_as": {
   "vector": "U, V, W and the speed |U| against the split-fibre, LDV or hot-wire components (velocity.U, velocity.V, velocity.W, speed)",
   "k": "the turbulent kinetic energy (k)",
   "thermistor_bracket": "a mean scalar speed (thermistor, cup or sonic anemometer) against |U| (vs.vector) and sqrt(|U|^2 + 2k) (vs.scalar)",
   "concentration": "the dimensionless concentration c* = C/c0 (cstar)",
   "theta": "the floor-referenced temperature fraction (theta)"
  },
  "value_columns": [
   "U",
   "V",
   "W",
   "speed",
   "k",
   "cstar",
   "theta",
   "T"
  ],
  "key_columns": [
   "config",
   "campaign",
   "instrument",
   "run",
   "wind_direction_deg",
   "point_id"
  ],
  "conventions": "velocities and the speed over U_ref, k over U_ref^2 (Cases E, F and G publish ratios already); U, V, W, |U| and the thermistor bracket scored as signed velocities (FAC2's ratio keeps the sign; hit rate D = 0.25, W = 0.05); k by the plain definitions (D = 0.25 only); a thermistor, cup or sonic reading (a mean scalar speed) scored against |U| (vs.vector) and sqrt(|U|^2 + 2k) (vs.scalar), the two ends of its bracket; c* = C/c0 with one detection limit per case, 1e-3 of the largest measured value; theta = (T_floor - T)/(T_floor - T_H) scored like a positive velocity. The same conventions score the served Eddy3D results (docs/validation/method.md).",
  "tool": "uv run python validation/score_submissions.py <folder>, from a checkout of the repository (pyproject.toml)",
  "metric_meaning": {
   "Count": "number of measured points scored",
   "MeanObserved": "mean of the measured, normalised quantity",
   "MeanPredicted": "mean of the modelled, normalised quantity",
   "Fb": "fractional bias, 2 (mean_obs - mean_pred) / (mean_obs + mean_pred); positive = model low",
   "Nmse": "normalised mean square error",
   "Nad": "normalised absolute difference",
   "Fac2": "fraction of points within a factor of two (harsh near zero for sign-changing V and W)",
   "HitRate": "fraction of points within D = 0.25 relative or W = 0.05 U_H absolute",
   "Mg": "geometric mean bias",
   "Vg": "geometric variance",
   "GeometricPairs": "pairs with both values positive (used for Mg/Vg)",
   "R": "Pearson correlation coefficient",
   "null": "a metric that is undefined for the data (for example Mg and Vg when no pair has both values positive; Fb, Nmse and Nad of a signed velocity component of Case H or I whose observed and predicted means are not both positive)"
  }
 },
 "geometry": {
  "url": "https://aij.eddy3d.com/api/cases/A/geometry.json",
  "files": [
   {
    "configuration": "default",
    "url": "https://aij.eddy3d.com/api/cases/A/geometry.stl?v=89acdfbbff84",
    "triangles": 12,
    "watertight": true
   }
  ]
 },
 "validation": {
  "url": "https://aij.eddy3d.com/api/cases/A/validation.json",
  "status": "scored",
  "engines": {
   "openfoam12-realizableKE": "scored",
   "openlb": "scored",
   "fluidx3d": "scored",
   "ml-surrogate": "scored"
  }
 },
 "known_issues": [
  "Lateral velocity V is positive toward +y (checked: V = -2.893 m/s at (-0.040, -0.050, 0.010), just outside the y < 0 side face, deflecting away from the centreline). Case B uses the OPPOSITE sign; the API flips Case B so both agree.",
  "Coordinates are metres (Case B's are millimetres in the published file).",
  "Case A's turbulence columns are rms values (u_rms, ...). The API serves VARIANCES (uu = u_rms^2) so A and B share one column meaning."
 ],
 "people": {
  "data_collectors": [
   "Takeshi Ishihara (The University of Tokyo)",
   "Kazuki Hibi (Numerical Flow Design)"
  ],
  "editors_distributors": [
   "Yoshihide Tominaga (Niigata Institute of Technology)",
   "Hideki Kikumoto (The University of Tokyo)",
   "Tsubasa Okaze (Institute of Science Tokyo)"
  ],
  "contact": "Takeshi Ishihara <ishihara@bridge.t.u-tokyo.ac.jp>"
 },
 "doi": "10.5281/zenodo.15050147",
 "doi_note": null,
 "citation_requested": "Meng, Y., & Hibi, K. (1998). Turbulent measurements of the flow field around a high-rise building. Journal of Wind Engineering, JAWE, 76, 55-64. https://doi.org/10.5359/jawe.1998.76_55",
 "citation": {
  "apa": "Ishihara, T., Hibi, K., Tominaga, Y., Kikumoto, H., & Okaze, T. (2025). AIJ UWE Benchmark Dataset – Case A (112): Wind Tunnel Experiment for Flow around a 1:1:2 Shape Building Model [Data set]. Zenodo. https://doi.org/10.5281/zenodo.15050147",
  "bibtex": "@misc{aijuwe_case_a,\n  author    = \"Ishihara, Takeshi and Hibi, Kazuki and Tominaga, Yoshihide and Kikumoto, Hideki and Okaze, Tsubasa\",\n  title     = \"{AIJ UWE Benchmark Dataset -- Case A (112): Wind Tunnel Experiment for Flow around a 1:1:2 Shape Building Model}\",\n  year      = \"2025\",\n  publisher = \"Zenodo\",\n  doi       = \"10.5281/zenodo.15050147\",\n  url       = \"https://doi.org/10.5281/zenodo.15050147\",\n  note      = \"Data set\"\n}"
 },
 "files_in_repository": {
  "folder": "https://github.com/Eddy3D-Dev/AIJ-Data-Validation/tree/main/raw/cases/case-a",
  "reference": "raw/cases/case-a/RS-caseA.csv",
  "approach_flow": "raw/cases/case-a/AF_caseA.csv",
  "readme": "raw/cases/case-a/readme_caseA.md"
 },
 "render": "https://aij.eddy3d.com/assets/geometry/case-a.png",
 "page": "https://aij.eddy3d.com/cases/case-a/"
}
