{
 "$schema": "https://aij.eddy3d.com/api/schemas/case.schema.json",
 "schema_version": "2.6.0",
 "data_version": "7ee0afb7cec8197e7edde0e7c282c8e6e9670b7cef003e6aa218c5a536817f48",
 "license": "CC-BY-4.0",
 "id": "C",
 "slug": "case-c",
 "title": "Case C — 3 × 3 block array",
 "summary": "3 x 3 array of 0.20 m cubes, centre block at 0D / 1D / 2D, pedestrian-height scalar speed (thermistor), 3 wind directions.",
 "configuration": {
  "array": "3 x 3 cubes, D = 0.20 m, block centres at x, y in {-0.4, 0, +0.4} m (pitch 0.40 m = 2D, street width D)",
  "D_m": 0.2,
  "centre_building": {
   "0D": "no centre building",
   "1D": "0.2 x 0.2 x 0.2 m (same as the surroundings)",
   "2D": "0.2 x 0.2 x 0.4 m"
  },
  "wind_directions_deg": [
   0,
   22.5,
   45
  ],
  "configurations": 9,
  "configurations_note": "3 centre-building heights x 3 wind directions; all nine share the identical 120-point set",
  "measurement_height_m": 0.02,
  "measurement_height_note": "z = 0.1 D for every point (2.0 m at the 1:100 scale Eddy3D solves it at)",
  "Re_D": 52000,
  "U_H_m_s": 3.654,
  "U_H_note": "U at z = D = 0.20 m from AF_caseC.csv; the data paper states U_H = 3.65 m/s",
  "instrument": "thermistor anemometer (omnidirectional scalar speed), 1 Hz, 30 s per point; approach flow by I-type hot wire, 500 Hz, 30 s",
  "tunnel": "Technology Development Division, Fujita Corporation, Tokyo",
  "pitch_note": "The 0.40 m pitch is read from MP-z-caseC.png and Figure 3 of the data paper (street = D); the 120-point grid alone bounds the pitch to (0.35, 0.40] m (the 49 absent nodes of the 13 x 13 grid are exactly the nine footprints for 0.375 m as well as 0.40 m)."
 },
 "configurations": [
  {
   "config": "0D",
   "wind_direction_deg": 0.0,
   "points": 120
  },
  {
   "config": "0D",
   "wind_direction_deg": 22.5,
   "points": 120
  },
  {
   "config": "0D",
   "wind_direction_deg": 45.0,
   "points": 120
  },
  {
   "config": "1D",
   "wind_direction_deg": 0.0,
   "points": 120
  },
  {
   "config": "1D",
   "wind_direction_deg": 22.5,
   "points": 120
  },
  {
   "config": "1D",
   "wind_direction_deg": 45.0,
   "points": 120
  },
  {
   "config": "2D",
   "wind_direction_deg": 0.0,
   "points": 120
  },
  {
   "config": "2D",
   "wind_direction_deg": 22.5,
   "points": 120
  },
  {
   "config": "2D",
   "wind_direction_deg": 45.0,
   "points": 120
  }
 ],
 "quantities": [
  "Vs"
 ],
 "units": {
  "length": "m (model scale)",
  "velocity": "m/s"
 },
 "frame": {
  "origin": "array centre on the ground plane (centre of the middle block)",
  "x": "+x streamwise at WD = 0 (checked three ways on the data: y -> -y is a symmetry, the x <= -0.25 band is faster than x >= +0.25 in every configuration, and the regression slope of Vs is most negative within 0.8-4.3 deg of +x)",
  "y": "+y lateral",
  "z": "+z up; all points at z = 0.02",
  "wind_direction_rotation": "In the CSV's own frame WD rotates the wind from +x TOWARD -y (the WD = 45 field is mirror-symmetric about y = -x to within the experiment's repeatability, 0.10-0.13 m/s, and not about y = +x, 0.5-0.8 m/s). Figure 3 of the data paper draws the fan rotating toward +y. The two disagree by a y-sign flip; this release keeps the CSV frame, which is the frame the point coordinates live in. The disagreement is invisible at WD = 0.",
  "lateral_sign_applied": 1,
  "coordinate_scale_applied": 1.0
 },
 "inflow_fit": {
  "method": "log law, kappa = 0.41, least squares on AF_caseC.csv (16 points, z = 0.01 ... 1.2 m); two windows, because Case C scores at ONE height (z = 0.02 m) and the near-ground half of the fit matters",
  "windows": [
   {
    "z_range_m": [
     0.02,
     0.4
    ],
    "u_star_m_s": 0.25598,
    "z0_mm": 0.4797,
    "error_at_U_D": "+3.08 %",
    "error_at_z_0.02": "-4.31 %",
    "scored_ratio_bias": "-7.17 %"
   },
   {
    "z_range_m": [
     0.01,
     0.4
    ],
    "u_star_m_s": 0.22853,
    "z0_mm": 0.2362,
    "error_at_U_D": "+2.83 %",
    "error_at_z_0.02": "+1.65 %",
    "scored_ratio_bias": "-1.15 %"
   }
  ],
  "power_law_exponent_fitted": 0.19,
  "power_law_exponent_paper": 0.28,
  "turbulence_intensity_at_D": 0.219,
  "note": "derived during scoping, not published by AIJ; the tunnel profile is closer to a power law than a log law, so a log-law inlet carries a ~2.3 % rms residual over the fitted range"
 },
 "approach_flow": {
  "source": "raw/cases/case-c/AF_caseC.csv",
  "units": {
   "z": "m",
   "U": "m/s",
   "u_rms": "m/s"
  },
  "rows": [
   {
    "z": 0.01,
    "U": 2.372,
    "u_rms": 0.56
   },
   {
    "z": 0.02,
    "U": 2.434,
    "u_rms": 0.564
   },
   {
    "z": 0.03,
    "U": 2.548,
    "u_rms": 0.563
   },
   {
    "z": 0.05,
    "U": 2.912,
    "u_rms": 0.695
   },
   {
    "z": 0.07,
    "U": 3.042,
    "u_rms": 0.71
   },
   {
    "z": 0.1,
    "U": 3.392,
    "u_rms": 0.743
   },
   {
    "z": 0.15,
    "U": 3.483,
    "u_rms": 0.78
   },
   {
    "z": 0.2,
    "U": 3.654,
    "u_rms": 0.801
   },
   {
    "z": 0.25,
    "U": 3.82,
    "u_rms": 0.812
   },
   {
    "z": 0.3,
    "U": 4.019,
    "u_rms": 0.786
   },
   {
    "z": 0.35,
    "U": 4.205,
    "u_rms": 0.83
   },
   {
    "z": 0.4,
    "U": 4.343,
    "u_rms": 0.809
   },
   {
    "z": 0.6,
    "U": 4.985,
    "u_rms": 0.796
   },
   {
    "z": 0.8,
    "U": 5.713,
    "u_rms": 0.587
   },
   {
    "z": 1.0,
    "U": 6.12,
    "u_rms": 0.283
   },
   {
    "z": 1.2,
    "U": 6.201,
    "u_rms": 0.148
   }
  ],
  "csv": {
   "url": "https://aij.eddy3d.com/api/cases/C/approach_flow.csv?v=98849731e877",
   "path": "cases/C/approach_flow.csv",
   "media_type": "text/csv",
   "bytes": 268,
   "sha256": "98849731e877fe940be821a1aa18469c8d4b94a5e54fd1e23c19f9337c39ea2a"
  }
 },
 "inflow": {
  "benchmark_data": {
   "approach_flow_csv": {
    "url": "https://aij.eddy3d.com/api/cases/C/approach_flow.csv?v=98849731e877",
    "path": "cases/C/approach_flow.csv",
    "media_type": "text/csv",
    "bytes": 268,
    "sha256": "98849731e877fe940be821a1aa18469c8d4b94a5e54fd1e23c19f9337c39ea2a"
   },
   "columns": [
    "z",
    "U",
    "u_rms"
   ],
   "units": {
    "z": "m",
    "U": "m/s",
    "u_rms": "m/s"
   },
   "rows": 16,
   "fit": {
    "method": "log law, kappa = 0.41, least squares on AF_caseC.csv (16 points, z = 0.01 ... 1.2 m); two windows, because Case C scores at ONE height (z = 0.02 m) and the near-ground half of the fit matters",
    "windows": [
     {
      "z_range_m": [
       0.02,
       0.4
      ],
      "u_star_m_s": 0.25598,
      "z0_mm": 0.4797,
      "error_at_U_D": "+3.08 %",
      "error_at_z_0.02": "-4.31 %",
      "scored_ratio_bias": "-7.17 %"
     },
     {
      "z_range_m": [
       0.01,
       0.4
      ],
      "u_star_m_s": 0.22853,
      "z0_mm": 0.2362,
      "error_at_U_D": "+2.83 %",
      "error_at_z_0.02": "+1.65 %",
      "scored_ratio_bias": "-1.15 %"
     }
    ],
    "power_law_exponent_fitted": 0.19,
    "power_law_exponent_paper": 0.28,
    "turbulence_intensity_at_D": 0.219,
    "note": "derived during scoping, not published by AIJ; the tunnel profile is closer to a power law than a log law, so a log-law inlet carries a ~2.3 % rms residual over the fitted range"
   },
   "note": "the measured profile and the fit of it are the benchmark's data as cleaned here; everything under `recommended` is a choice"
  },
  "recommended": {
   "status": "RECOMMENDED by this repository (not part of the benchmark): a log-law inlet fitted to the case's own approach-flow file, with k and epsilon from the standard neutral ABL relations. Any inlet may be submitted; say which in submission.yaml",
   "profile": "U(z) = u*/kappa ln((z + z0)/z0); k = u*^2 / sqrt(Cmu); epsilon = u*^3 / (kappa (z + z0))",
   "u_star_m_s": 0.25598,
   "z0_m": 0.0004797,
   "kappa": 0.41,
   "Cmu": 0.09,
   "k_m2_s2": 0.2184192013333333,
   "fit": "log law, kappa = 0.41, least squares on AF_caseC.csv (16 points, z = 0.01 ... 1.2 m); two windows, because Case C scores at ONE height (z = 0.02 m) and the near-ground half of the fit matters; the first window, [0.02, 0.4]",
   "U_ref_m_s": 3.654,
   "z_ref_m": 0.2,
   "openfoam": "atmBoundaryLayerInletVelocity / atmBoundaryLayerInletK / atmBoundaryLayerInletEpsilon with Uref, Zref, z0 and d = 0; nutkAtmRoughWallFunction with the same z0 on the ground: cases/{id}/inflow_openfoam.txt holds them"
  },
  "flow_direction": {
   "convention": "along_x",
   "meaning": "+x is along the wind at WD = 0: flowDir (1 0 0); another WD rotates it about +z by the case's rotation sense (frame.wind_direction_rotation)",
   "wind_directions_deg": [
    0.0,
    22.5,
    45.0
   ]
  },
  "eddy3d_runs": [
   {
    "run_id": "C.openfoam12-realizableKE.0D",
    "engine": "openfoam12-realizableKE",
    "scale": 100,
    "z0.model.m": 0.0002362,
    "z0.full.m": 0.02362,
    "mesh.cells": 313539
   },
   {
    "run_id": "C.openfoam12-realizableKE.1D",
    "engine": "openfoam12-realizableKE",
    "scale": 100,
    "z0.model.m": 0.0002362,
    "z0.full.m": 0.02362,
    "mesh.cells": 310091
   },
   {
    "run_id": "C.openfoam12-realizableKE.2D",
    "engine": "openfoam12-realizableKE",
    "scale": 100,
    "z0.model.m": 0.0002362,
    "z0.full.m": 0.02362,
    "mesh.cells": 313255
   },
   {
    "run_id": "C.ml-surrogate",
    "engine": "ml-surrogate",
    "scale": 90
   }
  ],
  "domain": "the extents, blockage and cell sizes of Eddy3D's domains are not in its snapshots and are not stated here; mesh.cells and the scale are, where the snapshot has them"
 },
 "points": {
  "url": "https://aij.eddy3d.com/api/cases/C/points.json",
  "csv": {
   "url": "https://aij.eddy3d.com/api/cases/C/points.csv?v=7448f0ceae37",
   "path": "cases/C/points.csv",
   "media_type": "text/csv",
   "bytes": 58159,
   "sha256": "7448f0ceae37f076ba00da6b542797d81e9edd92fdecc7b49dd6813577550a80"
  },
  "source": "clean/cases/C/points.csv",
  "rows": 1080,
  "distinct_points": 120,
  "columns": [
   "point_id",
   "config",
   "instrument",
   "wind_direction_deg",
   "x",
   "y",
   "z",
   "Vs",
   "campaign"
  ],
  "counts": {
   "config": {
    "0D": 360,
    "1D": 360,
    "2D": 360
   },
   "instrument": {
    "thermistor": 1080
   },
   "wind_direction_deg": {
    "0.0": 360,
    "22.5": 360,
    "45.0": 360
   }
  },
  "nulls": {},
  "bbox_min": [
   -0.3,
   -0.3,
   0.02
  ],
  "bbox_max": [
   0.3,
   0.3,
   0.02
  ]
 },
 "probes": {
  "csv": {
   "url": "https://aij.eddy3d.com/api/cases/C/probes.csv?v=5b794e8356f0",
   "path": "cases/C/probes.csv",
   "media_type": "text/csv",
   "bytes": 74469,
   "sha256": "5b794e8356f0d8fd97f30098f7ff04105ad5685d12bd3a816be0fce58204fb2c"
  },
  "rows": 1080,
  "columns": [
   "point_id",
   "config",
   "campaign",
   "instrument",
   "run",
   "wind_direction_deg",
   "x",
   "y",
   "z",
   "scored_as"
  ],
  "columns_meaning": "the key columns of a scored file (point_id with config, campaign, instrument, run and wind_direction_deg as the case has them), x, y, z in m (case frame), and scored_as: the families the row is scored in (vector, k, thermistor_bracket, concentration, theta, joined by +)"
 },
 "scoring": {
  "U_ref_m_s": 3.654,
  "U_ref_meaning": "U_H = U(z = D = 0.20 m) of the approach flow",
  "theta": null,
  "scored_as": {
   "vector": "U, V, W and the speed |U| against the split-fibre, LDV or hot-wire components (velocity.U, velocity.V, velocity.W, speed)",
   "k": "the turbulent kinetic energy (k)",
   "thermistor_bracket": "a mean scalar speed (thermistor, cup or sonic anemometer) against |U| (vs.vector) and sqrt(|U|^2 + 2k) (vs.scalar)",
   "concentration": "the dimensionless concentration c* = C/c0 (cstar)",
   "theta": "the floor-referenced temperature fraction (theta)"
  },
  "value_columns": [
   "U",
   "V",
   "W",
   "speed",
   "k",
   "cstar",
   "theta",
   "T"
  ],
  "key_columns": [
   "config",
   "campaign",
   "instrument",
   "run",
   "wind_direction_deg",
   "point_id"
  ],
  "conventions": "velocities and the speed over U_ref, k over U_ref^2 (Cases E, F and G publish ratios already); U, V, W, |U| and the thermistor bracket scored as signed velocities (FAC2's ratio keeps the sign; hit rate D = 0.25, W = 0.05); k by the plain definitions (D = 0.25 only); a thermistor, cup or sonic reading (a mean scalar speed) scored against |U| (vs.vector) and sqrt(|U|^2 + 2k) (vs.scalar), the two ends of its bracket; c* = C/c0 with one detection limit per case, 1e-3 of the largest measured value; theta = (T_floor - T)/(T_floor - T_H) scored like a positive velocity. The same conventions score the served Eddy3D results (docs/validation/method.md).",
  "tool": "uv run python validation/score_submissions.py <folder>, from a checkout of the repository (pyproject.toml)",
  "metric_meaning": {
   "Count": "number of measured points scored",
   "MeanObserved": "mean of the measured, normalised quantity",
   "MeanPredicted": "mean of the modelled, normalised quantity",
   "Fb": "fractional bias, 2 (mean_obs - mean_pred) / (mean_obs + mean_pred); positive = model low",
   "Nmse": "normalised mean square error",
   "Nad": "normalised absolute difference",
   "Fac2": "fraction of points within a factor of two (harsh near zero for sign-changing V and W)",
   "HitRate": "fraction of points within D = 0.25 relative or W = 0.05 U_H absolute",
   "Mg": "geometric mean bias",
   "Vg": "geometric variance",
   "GeometricPairs": "pairs with both values positive (used for Mg/Vg)",
   "R": "Pearson correlation coefficient",
   "null": "a metric that is undefined for the data (for example Mg and Vg when no pair has both values positive; Fb, Nmse and Nad of a signed velocity component of Case H or I whose observed and predicted means are not both positive)"
  }
 },
 "geometry": {
  "url": "https://aij.eddy3d.com/api/cases/C/geometry.json",
  "files": [
   {
    "configuration": "2D",
    "url": "https://aij.eddy3d.com/api/cases/C/geometry.stl?v=b8c31c57c453",
    "triangles": 108,
    "watertight": true
   },
   {
    "configuration": "0D",
    "url": "https://aij.eddy3d.com/api/cases/C/geometry_0D.stl?v=0f08bcd4dd6b",
    "triangles": 96,
    "watertight": true
   },
   {
    "configuration": "1D",
    "url": "https://aij.eddy3d.com/api/cases/C/geometry_1D.stl?v=ac92c8ed427c",
    "triangles": 108,
    "watertight": true
   }
  ]
 },
 "validation": {
  "url": "https://aij.eddy3d.com/api/cases/C/validation.json",
  "status": "scored",
  "engines": {
   "openfoam12-realizableKE": "scored",
   "openlb": "not comparable",
   "fluidx3d": "pending",
   "ml-surrogate": "scored"
  }
 },
 "known_issues": [
  "The measured quantity Vs is the MEAN OMNIDIRECTIONAL SCALAR speed from a thermistor, not |mean velocity vector|. A RANS |U| is biased low against it; the data paper suggests comparing sqrt(|U|^2 + 2k) as a conservative correction (over all 1080 rows no Vs is below 0.13 U_H).",
  "The 'CB' column is TEXT ('0D', '1D', '2D'); a reader that parses every field as a number gets NaN for it. The header ends with a trailing comma (an empty 8th column).",
  "1080 rows = 3 wind directions x 3 centre buildings x 120 points, not 3 configurations. In the 0D configuration the 25 centre grid nodes are still absent although the ground there is free: the grid is held constant across configurations.",
  "24 of the 120 points sit exactly on a building face plane (|x| = 0.30 or |y| = 0.30) in the open gap between two blocks: legitimate fluid points, but a probe's cell lookup is delicate there.",
  "Point numbers 1, 2, 3, 34, 35, 36, 37, 46, 55, 100, 101, 102 do not occur (No. runs 4 ... 132 with nine interior gaps).",
  "Experimental repeatability, from the mirror-symmetric point pairs: mean |dVs| 0.088-0.137 m/s (0.024-0.038 U_H)."
 ],
 "people": {
  "data_collectors": [
   "Yoshitami Nonomura (Yamato University)"
  ],
  "editors_distributors": [
   "Yoshihide Tominaga (Niigata Institute of Technology)",
   "Hideki Kikumoto (The University of Tokyo)",
   "Tsubasa Okaze (Institute of Science Tokyo)"
  ],
  "contact": "Yoshitami Nonomura <nonomura.yoshitami@yamato-u.ac.jp>"
 },
 "doi": "10.5281/zenodo.15401791",
 "doi_note": null,
 "citation_requested": "Nonomura, Y., Kobayashi, N., Tominaga, Y., Mochida, A. (2003). The cross comparison of CFD results for flow field around building models (part 3). Japan Association for Wind Engineering, 95, 83-84 (in Japanese). https://doi.org/10.14887/jaweam.2003.0.41.0",
 "citation": {
  "apa": "Nonomura, Y., Tominaga, Y., Kikumoto, H., & Okaze, T. (2025). AIJ UWE Benchmark Dataset – Case C (Blocks): Wind Tunnel Experiment for Flow within Simple Building Blocks [Data set]. Zenodo. https://doi.org/10.5281/zenodo.15401791",
  "bibtex": "@misc{aijuwe_case_c,\n  author    = \"Nonomura, Yoshitami and Tominaga, Yoshihide and Kikumoto, Hideki and Okaze, Tsubasa\",\n  title     = \"{AIJ UWE Benchmark Dataset -- Case C (Blocks): Wind Tunnel Experiment for Flow within Simple Building Blocks}\",\n  year      = \"2025\",\n  publisher = \"Zenodo\",\n  doi       = \"10.5281/zenodo.15401791\",\n  url       = \"https://doi.org/10.5281/zenodo.15401791\",\n  note      = \"Data set\"\n}"
 },
 "files_in_repository": {
  "folder": "https://github.com/Eddy3D-Dev/AIJ-Data-Validation/tree/main/raw/cases/case-c",
  "reference": "raw/cases/case-c/RS_caseC.csv",
  "approach_flow": "raw/cases/case-c/AF_caseC.csv",
  "readme": "raw/cases/case-c/readme_caseC.md"
 },
 "render": "https://aij.eddy3d.com/assets/geometry/case-c-2d.png",
 "page": "https://aij.eddy3d.com/cases/case-c/"
}
