{
 "$schema": "https://aij.eddy3d.com/api/schemas/case.schema.json",
 "schema_version": "2.6.0",
 "data_version": "7ee0afb7cec8197e7edde0e7c282c8e6e9670b7cef003e6aa218c5a536817f48",
 "license": "CC-BY-4.0",
 "id": "F",
 "slug": "case-f",
 "title": "Case F — Shinjuku district",
 "summary": "Shinjuku sub-centre, Tokyo, November 1978: 1:800 tunnel (thermistor, 5 / 9 / 20 m) and a year of field cup anemometers; velocity ratio to the 500 m wind, 12 tunnel and 16 field directions.",
 "configuration": {
  "district": "Shinjuku sub-centre during construction of the high-rise group, building configuration of November 1978",
  "scale": "1:800",
  "model": "terrain and buildings in a disc of radius 725 m (BD_caseF.stl; the readme and the data paper say 800 m / 1600 m diameter)",
  "points": 13,
  "point_numbers": "1-3, 5-11, 13-15 (4 and 12 absent; points 16 and later belong to later construction stages and are not in the dataset)",
  "wind_directions": [
   "N",
   "NNE",
   "NE",
   "ENE",
   "SE",
   "SSE",
   "S",
   "SSW",
   "SW",
   "WNW",
   "NW",
   "NNW"
  ],
  "wind_directions_field": [
   "N",
   "NNE",
   "NE",
   "ENE",
   "E",
   "ESE",
   "SE",
   "SSE",
   "S",
   "SSW",
   "SW",
   "WSW",
   "W",
   "WNW",
   "NW",
   "NNW"
  ],
  "measurement_planes_above_ground_m": [
   5,
   9,
   20
  ],
  "measurement_planes_z_m": [
   15,
   19,
   30
  ],
  "ground_offset_m": 10,
  "normalisation": "velocity ratio = mean speed / the approaching mean speed at the boundary-layer height 500 m (full scale); the field values were converted to it with the tunnel (readme). U(500 m) is 10 m/s in the data paper and 10.65 m/s implied by the profile",
  "instrument": "tunnel: thermistor anemometer, 30 s averaging; field: three-cup anemometer with wind vane, 10-minute means above 5 m/s at the reference roof, December 1977 - November 1978",
  "tunnel": "Shimizu Corporation wind tunnel; cross-section 1.55 m wide, 2.2 m high; power-law inflow, exponent 1/4",
  "reference_roofs": {
   "SMB": "Shinjuku-Mitsui Building, roof G.L.+210 m, anemometer G.L.+237 m, for NW-NE",
   "KDD": "KDD Building, roof G.L.+165 m, anemometer G.L.+187 m, for the other directions"
  }
 },
 "configurations": [
  {
   "config": "default",
   "campaign": "field",
   "instrument": "cup_anemometer",
   "wind_direction": "N",
   "wind_direction_deg": 0.0,
   "points": 13
  },
  {
   "config": "default",
   "campaign": "field",
   "instrument": "cup_anemometer",
   "wind_direction": "NNE",
   "wind_direction_deg": 22.5,
   "points": 13
  },
  {
   "config": "default",
   "campaign": "field",
   "instrument": "cup_anemometer",
   "wind_direction": "NE",
   "wind_direction_deg": 45.0,
   "points": 13
  },
  {
   "config": "default",
   "campaign": "field",
   "instrument": "cup_anemometer",
   "wind_direction": "ENE",
   "wind_direction_deg": 67.5,
   "points": 13
  },
  {
   "config": "default",
   "campaign": "field",
   "instrument": "cup_anemometer",
   "wind_direction": "E",
   "wind_direction_deg": 90.0,
   "points": 13
  },
  {
   "config": "default",
   "campaign": "field",
   "instrument": "cup_anemometer",
   "wind_direction": "ESE",
   "wind_direction_deg": 112.5,
   "points": 13
  },
  {
   "config": "default",
   "campaign": "field",
   "instrument": "cup_anemometer",
   "wind_direction": "SE",
   "wind_direction_deg": 135.0,
   "points": 13
  },
  {
   "config": "default",
   "campaign": "field",
   "instrument": "cup_anemometer",
   "wind_direction": "SSE",
   "wind_direction_deg": 157.5,
   "points": 13
  },
  {
   "config": "default",
   "campaign": "field",
   "instrument": "cup_anemometer",
   "wind_direction": "S",
   "wind_direction_deg": 180.0,
   "points": 13
  },
  {
   "config": "default",
   "campaign": "field",
   "instrument": "cup_anemometer",
   "wind_direction": "SSW",
   "wind_direction_deg": 202.5,
   "points": 13
  },
  {
   "config": "default",
   "campaign": "field",
   "instrument": "cup_anemometer",
   "wind_direction": "SW",
   "wind_direction_deg": 225.0,
   "points": 13
  },
  {
   "config": "default",
   "campaign": "field",
   "instrument": "cup_anemometer",
   "wind_direction": "WSW",
   "wind_direction_deg": 247.5,
   "points": 13
  },
  {
   "config": "default",
   "campaign": "field",
   "instrument": "cup_anemometer",
   "wind_direction": "W",
   "wind_direction_deg": 270.0,
   "points": 13
  },
  {
   "config": "default",
   "campaign": "field",
   "instrument": "cup_anemometer",
   "wind_direction": "WNW",
   "wind_direction_deg": 292.5,
   "points": 13
  },
  {
   "config": "default",
   "campaign": "field",
   "instrument": "cup_anemometer",
   "wind_direction": "NW",
   "wind_direction_deg": 315.0,
   "points": 13
  },
  {
   "config": "default",
   "campaign": "field",
   "instrument": "cup_anemometer",
   "wind_direction": "NNW",
   "wind_direction_deg": 337.5,
   "points": 13
  },
  {
   "config": "default",
   "campaign": "wind_tunnel",
   "instrument": "thermistor",
   "wind_direction": "N",
   "wind_direction_deg": 0.0,
   "points": 13
  },
  {
   "config": "default",
   "campaign": "wind_tunnel",
   "instrument": "thermistor",
   "wind_direction": "NNE",
   "wind_direction_deg": 22.5,
   "points": 13
  },
  {
   "config": "default",
   "campaign": "wind_tunnel",
   "instrument": "thermistor",
   "wind_direction": "NE",
   "wind_direction_deg": 45.0,
   "points": 13
  },
  {
   "config": "default",
   "campaign": "wind_tunnel",
   "instrument": "thermistor",
   "wind_direction": "ENE",
   "wind_direction_deg": 67.5,
   "points": 13
  },
  {
   "config": "default",
   "campaign": "wind_tunnel",
   "instrument": "thermistor",
   "wind_direction": "SE",
   "wind_direction_deg": 135.0,
   "points": 13
  },
  {
   "config": "default",
   "campaign": "wind_tunnel",
   "instrument": "thermistor",
   "wind_direction": "SSE",
   "wind_direction_deg": 157.5,
   "points": 13
  },
  {
   "config": "default",
   "campaign": "wind_tunnel",
   "instrument": "thermistor",
   "wind_direction": "S",
   "wind_direction_deg": 180.0,
   "points": 13
  },
  {
   "config": "default",
   "campaign": "wind_tunnel",
   "instrument": "thermistor",
   "wind_direction": "SSW",
   "wind_direction_deg": 202.5,
   "points": 13
  },
  {
   "config": "default",
   "campaign": "wind_tunnel",
   "instrument": "thermistor",
   "wind_direction": "SW",
   "wind_direction_deg": 225.0,
   "points": 13
  },
  {
   "config": "default",
   "campaign": "wind_tunnel",
   "instrument": "thermistor",
   "wind_direction": "WNW",
   "wind_direction_deg": 292.5,
   "points": 13
  },
  {
   "config": "default",
   "campaign": "wind_tunnel",
   "instrument": "thermistor",
   "wind_direction": "NW",
   "wind_direction_deg": 315.0,
   "points": 13
  },
  {
   "config": "default",
   "campaign": "wind_tunnel",
   "instrument": "thermistor",
   "wind_direction": "NNW",
   "wind_direction_deg": 337.5,
   "points": 13
  },
  {
   "config": "h20",
   "campaign": "wind_tunnel",
   "instrument": "thermistor",
   "wind_direction": "N",
   "wind_direction_deg": 0.0,
   "points": 9
  },
  {
   "config": "h20",
   "campaign": "wind_tunnel",
   "instrument": "thermistor",
   "wind_direction": "NNE",
   "wind_direction_deg": 22.5,
   "points": 13
  },
  {
   "config": "h20",
   "campaign": "wind_tunnel",
   "instrument": "thermistor",
   "wind_direction": "ENE",
   "wind_direction_deg": 67.5,
   "points": 12
  },
  {
   "config": "h20",
   "campaign": "wind_tunnel",
   "instrument": "thermistor",
   "wind_direction": "S",
   "wind_direction_deg": 180.0,
   "points": 11
  },
  {
   "config": "h20",
   "campaign": "wind_tunnel",
   "instrument": "thermistor",
   "wind_direction": "SSW",
   "wind_direction_deg": 202.5,
   "points": 12
  },
  {
   "config": "h20",
   "campaign": "wind_tunnel",
   "instrument": "thermistor",
   "wind_direction": "SW",
   "wind_direction_deg": 225.0,
   "points": 9
  },
  {
   "config": "h20",
   "campaign": "wind_tunnel",
   "instrument": "thermistor",
   "wind_direction": "NNW",
   "wind_direction_deg": 337.5,
   "points": 13
  },
  {
   "config": "h5",
   "campaign": "wind_tunnel",
   "instrument": "thermistor",
   "wind_direction": "NNE",
   "wind_direction_deg": 22.5,
   "points": 4
  },
  {
   "config": "h5",
   "campaign": "wind_tunnel",
   "instrument": "thermistor",
   "wind_direction": "ENE",
   "wind_direction_deg": 67.5,
   "points": 8
  },
  {
   "config": "h5",
   "campaign": "wind_tunnel",
   "instrument": "thermistor",
   "wind_direction": "S",
   "wind_direction_deg": 180.0,
   "points": 5
  },
  {
   "config": "h5",
   "campaign": "wind_tunnel",
   "instrument": "thermistor",
   "wind_direction": "SSW",
   "wind_direction_deg": 202.5,
   "points": 5
  },
  {
   "config": "h5",
   "campaign": "wind_tunnel",
   "instrument": "thermistor",
   "wind_direction": "NNW",
   "wind_direction_deg": 337.5,
   "points": 7
  }
 ],
 "quantities": [
  "velocity_ratio",
  "velocity_ratio_sd"
 ],
 "units": {
  "length": "m (FULL scale)",
  "velocity_ratio": "dimensionless",
  "velocity_ratio_sd": "dimensionless"
 },
 "frame": {
  "origin": "centre of the reproduced district, tunnel floor plane",
  "x": "+x EAST (full-scale metres)",
  "y": "+y NORTH (compass rose in MP_caseF.png)",
  "z": "+z up from the TUNNEL FLOOR; the readme's rule is ground = z - 10 m (the STL's terrain under the points is at z = 5 m)",
  "wind_direction_rotation": "compass FROM-direction (N = 0, E = 90), so N blows toward -y; flow_dir = (-sin WD, -cos WD). Not stated by the sources; supported by the reference-building choice and by upwind roughness, and at NNW by a solved field (status 'corroborated by a solved field'; the other directions stay 'unverified').",
  "lateral_sign_applied": 1,
  "coordinate_scale_applied": 800.0
 },
 "inflow_fit": {
  "method": "power law on the 18 published heights (z 10 ... 400 m full scale); the data paper states exponent 1/4",
  "power_law_exponent_fitted": 0.277,
  "power_law_exponent_paper": 0.25,
  "U_500m_m_s": {
   "data_paper": 10.0,
   "implied_by_profile": 10.65
  },
  "note": "AF_caseF.csv stops at 400 m (U = 10.0 m/s); the workbook's U/UR profile (0.94 at 400 m) puts the 500 m speed at 10.65 m/s"
 },
 "approach_flow": {
  "source": "raw/cases/case-f/AF_caseF.csv",
  "units": {
   "z": "m",
   "U": "m/s",
   "u_rms": "m/s"
  },
  "rows": [
   {
    "z": 10.0,
    "U": 3.4,
    "u_rms": 0.92
   },
   {
    "z": 20.0,
    "U": 4.5,
    "u_rms": 1.06
   },
   {
    "z": 35.0,
    "U": 4.9,
    "u_rms": 1.11
   },
   {
    "z": 40.0,
    "U": 5.3,
    "u_rms": 1.19
   },
   {
    "z": 50.0,
    "U": 5.9,
    "u_rms": 1.23
   },
   {
    "z": 60.0,
    "U": 6.2,
    "u_rms": 1.23
   },
   {
    "z": 65.0,
    "U": 6.4,
    "u_rms": 1.23
   },
   {
    "z": 80.0,
    "U": 6.6,
    "u_rms": 1.11
   },
   {
    "z": 100.0,
    "U": 6.7,
    "u_rms": 1.06
   },
   {
    "z": 120.0,
    "U": 6.9,
    "u_rms": 1.02
   },
   {
    "z": 140.0,
    "U": 7.2,
    "u_rms": 1.02
   },
   {
    "z": 160.0,
    "U": 7.8,
    "u_rms": 0.92
   },
   {
    "z": 200.0,
    "U": 8.2,
    "u_rms": 0.92
   },
   {
    "z": 240.0,
    "U": 8.6,
    "u_rms": 0.75
   },
   {
    "z": 280.0,
    "U": 8.9,
    "u_rms": 0.61
   },
   {
    "z": 320.0,
    "U": 9.5,
    "u_rms": 0.53
   },
   {
    "z": 360.0,
    "U": 9.8,
    "u_rms": 0.43
   },
   {
    "z": 400.0,
    "U": 10.0,
    "u_rms": 0.31
   }
  ],
  "csv": {
   "url": "https://aij.eddy3d.com/api/cases/F/approach_flow.csv?v=66aefe558a82",
   "path": "cases/F/approach_flow.csv",
   "media_type": "text/csv",
   "bytes": 273,
   "sha256": "66aefe558a82a5e35b569f68bef7411d360266a82fdce773367458d0a6ef0f5f"
  }
 },
 "inflow": {
  "benchmark_data": {
   "approach_flow_csv": {
    "url": "https://aij.eddy3d.com/api/cases/F/approach_flow.csv?v=66aefe558a82",
    "path": "cases/F/approach_flow.csv",
    "media_type": "text/csv",
    "bytes": 273,
    "sha256": "66aefe558a82a5e35b569f68bef7411d360266a82fdce773367458d0a6ef0f5f"
   },
   "columns": [
    "z",
    "U",
    "u_rms"
   ],
   "units": {
    "z": "m",
    "U": "m/s",
    "u_rms": "m/s"
   },
   "rows": 18,
   "fit": {
    "method": "power law on the 18 published heights (z 10 ... 400 m full scale); the data paper states exponent 1/4",
    "power_law_exponent_fitted": 0.277,
    "power_law_exponent_paper": 0.25,
    "U_500m_m_s": {
     "data_paper": 10.0,
     "implied_by_profile": 10.65
    },
    "note": "AF_caseF.csv stops at 400 m (U = 10.0 m/s); the workbook's U/UR profile (0.94 at 400 m) puts the 500 m speed at 10.65 m/s"
   },
   "note": "the measured profile and the fit of it are the benchmark's data as cleaned here; everything under `recommended` is a choice"
  },
  "recommended": {
   "status": "RECOMMENDED by this repository (not part of the benchmark): no log law fits this case (inflow_fit says why); use the measured approach-flow profile as a tabulated inlet (approach_flow.csv). Any inlet may be submitted; say which in submission.yaml",
   "profile": "U(z) and, where published, k(z) tabulated from approach_flow.csv; epsilon = Cmu^0.5 k dU/dz where k is published, else from your own closure",
   "kappa": 0.41,
   "Cmu": 0.09,
   "U_ref_m_s": null,
   "z_ref_m": null,
   "openfoam": "fixedProfile (OpenFOAM.org) with the table, or timeVaryingMappedFixedValue: cases/{id}/inflow_openfoam.txt holds the table"
  },
  "flow_direction": {
   "convention": "geographic_x_east_y_north",
   "meaning": "meteorological FROM-direction theta, clockwise from north: flowDir (-sin theta, -cos theta, 0)",
   "wind_directions_deg": null
  },
  "eddy3d_runs": [
   {
    "run_id": "F.openfoam12-realizableKE.literal",
    "engine": "openfoam12-realizableKE",
    "inlet": "manual (the workbook's Inflow sheet, ZR 500 m, UR 10 m/s, 20 rows)",
    "scale": 800,
    "mesh.cells": 2143488
   },
   {
    "run_id": "F.openfoam12-realizableKE.agl",
    "engine": "openfoam12-realizableKE",
    "inlet": "manual (the workbook's Inflow sheet, ZR 500 m, UR 10 m/s, 20 rows)",
    "scale": 800,
    "mesh.cells": 2143488
   }
  ],
  "domain": "the extents, blockage and cell sizes of Eddy3D's domains are not in its snapshots and are not stated here; mesh.cells and the scale are, where the snapshot has them"
 },
 "points": {
  "url": "https://aij.eddy3d.com/api/cases/F/points.json",
  "csv": {
   "url": "https://aij.eddy3d.com/api/cases/F/points.csv?v=09b109e58dd3",
   "path": "cases/F/points.csv",
   "media_type": "text/csv",
   "bytes": 31181,
   "sha256": "09b109e58dd39fb744e69de7adab7df216762c2bfa49fbabe4b94b2a7fbe543a"
  },
  "source": "clean/cases/F/points.csv",
  "rows": 472,
  "distinct_points": 13,
  "columns": [
   "point_id",
   "config",
   "instrument",
   "wind_direction",
   "wind_direction_deg",
   "x",
   "y",
   "z",
   "velocity_ratio",
   "campaign",
   "velocity_ratio_sd"
  ],
  "counts": {
   "config": {
    "default": 364,
    "h20": 79,
    "h5": 29
   },
   "instrument": {
    "cup_anemometer": 208,
    "thermistor": 264
   },
   "wind_direction_deg": {
    "0.0": 35,
    "112.5": 13,
    "135.0": 26,
    "157.5": 26,
    "180.0": 42,
    "202.5": 43,
    "22.5": 43,
    "225.0": 35,
    "247.5": 13,
    "270.0": 13,
    "292.5": 26,
    "315.0": 26,
    "337.5": 46,
    "45.0": 26,
    "67.5": 46,
    "90.0": 13
   }
  },
  "nulls": {
   "velocity_ratio_sd": 264
  },
  "bbox_min": [
   -263.7,
   -493.6,
   13.0
  ],
  "bbox_max": [
   268.6,
   364.1,
   30.0
  ]
 },
 "probes": {
  "csv": {
   "url": "https://aij.eddy3d.com/api/cases/F/probes.csv?v=d7dbd73343b9",
   "path": "cases/F/probes.csv",
   "media_type": "text/csv",
   "bytes": 34936,
   "sha256": "d7dbd73343b936559b85391887158c5b9fcd9555967742dd1a8185b005404cc2"
  },
  "rows": 472,
  "columns": [
   "point_id",
   "config",
   "campaign",
   "instrument",
   "run",
   "wind_direction_deg",
   "x",
   "y",
   "z",
   "scored_as"
  ],
  "columns_meaning": "the key columns of a scored file (point_id with config, campaign, instrument, run and wind_direction_deg as the case has them), x, y, z in m (case frame), and scored_as: the families the row is scored in (vector, k, thermistor_bracket, concentration, theta, joined by +)"
 },
 "scoring": {
  "U_ref_m_s": null,
  "U_ref_meaning": "the table holds the mean speed over U(500 m); give ratios over your own U(500 m) of the approach flow",
  "theta": null,
  "scored_as": {
   "vector": "U, V, W and the speed |U| against the split-fibre, LDV or hot-wire components (velocity.U, velocity.V, velocity.W, speed)",
   "k": "the turbulent kinetic energy (k)",
   "thermistor_bracket": "a mean scalar speed (thermistor, cup or sonic anemometer) against |U| (vs.vector) and sqrt(|U|^2 + 2k) (vs.scalar)",
   "concentration": "the dimensionless concentration c* = C/c0 (cstar)",
   "theta": "the floor-referenced temperature fraction (theta)"
  },
  "value_columns": [
   "U",
   "V",
   "W",
   "speed",
   "k",
   "cstar",
   "theta",
   "T"
  ],
  "key_columns": [
   "config",
   "campaign",
   "instrument",
   "run",
   "wind_direction_deg",
   "point_id"
  ],
  "conventions": "velocities and the speed over U_ref, k over U_ref^2 (Cases E, F and G publish ratios already); U, V, W, |U| and the thermistor bracket scored as signed velocities (FAC2's ratio keeps the sign; hit rate D = 0.25, W = 0.05); k by the plain definitions (D = 0.25 only); a thermistor, cup or sonic reading (a mean scalar speed) scored against |U| (vs.vector) and sqrt(|U|^2 + 2k) (vs.scalar), the two ends of its bracket; c* = C/c0 with one detection limit per case, 1e-3 of the largest measured value; theta = (T_floor - T)/(T_floor - T_H) scored like a positive velocity. The same conventions score the served Eddy3D results (docs/validation/method.md).",
  "tool": "uv run python validation/score_submissions.py <folder>, from a checkout of the repository (pyproject.toml)",
  "metric_meaning": {
   "Count": "number of measured points scored",
   "MeanObserved": "mean of the measured, normalised quantity",
   "MeanPredicted": "mean of the modelled, normalised quantity",
   "Fb": "fractional bias, 2 (mean_obs - mean_pred) / (mean_obs + mean_pred); positive = model low",
   "Nmse": "normalised mean square error",
   "Nad": "normalised absolute difference",
   "Fac2": "fraction of points within a factor of two (harsh near zero for sign-changing V and W)",
   "HitRate": "fraction of points within D = 0.25 relative or W = 0.05 U_H absolute",
   "Mg": "geometric mean bias",
   "Vg": "geometric variance",
   "GeometricPairs": "pairs with both values positive (used for Mg/Vg)",
   "R": "Pearson correlation coefficient",
   "null": "a metric that is undefined for the data (for example Mg and Vg when no pair has both values positive; Fb, Nmse and Nad of a signed velocity component of Case H or I whose observed and predicted means are not both positive)"
  }
 },
 "geometry": {
  "url": "https://aij.eddy3d.com/api/cases/F/geometry.json",
  "files": [
   {
    "configuration": "default",
    "url": "https://aij.eddy3d.com/api/cases/F/geometry.stl?v=8799740aa324",
    "triangles": 56250,
    "watertight": true
   }
  ]
 },
 "validation": {
  "url": "https://aij.eddy3d.com/api/cases/F/validation.json",
  "status": "scored",
  "engines": {
   "openfoam12-realizableKE": "scored",
   "openlb": "pending",
   "fluidx3d": "pending",
   "ml-surrogate": "pending"
  }
 },
 "known_issues": [
  "The 16 field rows of point 14 in RS-FO_caseF.csv hold the workbook's value of the NEXT wind direction clockwise (the series is shifted by one); the cleaned table follows the workbook (clean/QUESTIONS.md QF1).",
  "Tunnel and STL coordinates are MODEL scale (1:800); the field's are full scale. The case frame is full scale; the tunnel's x, y, z and the STL are multiplied by 800.",
  "z is height above the tunnel floor. The readme's rule 'ground = z - 10 m' gives the 5 / 9 / 20 m planes, but the STL's terrain under all 13 points is at z = 5 m, so the planes stand 10 / 14 / 25 m above it.",
  "BD_caseF.stl is wound inward on every ground, roof and sampled wall facet and is open along the rim of its 725 m disc (812 boundary edges); the served geometry.stl is re-wound outward and closed with a base slab down to z = -1 m.",
  "MP_caseF.csv names the two reference points the other way round from the workbook, the STL and MP_caseF.png (the workbook's Shinjuku-Mitsui Building is the 225 m tower at (-17.5, 96.0), the KDD Building the 180 m one at (85.8, -347.1)).",
  "Field values are the legacy workbook's roof-anemometer ratios times 0.940 (NW-NE) or 0.963 (other directions); sigma is the workbook's S.D. rounded to 0.01 times that factor, so it moves in steps of 0.0094 / 0.0096.",
  "The tunnel did not run E, ESE, WSW or W; the field data cover all 16. The 5 m and 20 m planes exist at some points only (29 and 79 rows).",
  "One tunnel value (point 8, SW, 9 m: 0.474) has no counterpart in the workbook's results sheet, and the flat 'Sheet1' table has 0.63 there.",
  "Field anemometer heights above the tunnel floor are 13 - 21 m (3 - 11 m above ground by the readme's rule); the data paper says 3 - 9 m, so points 13 and 14 (11 m) disagree.",
  "The thermistor reads a SCALAR speed and the cup anemometer a 10-minute mean: a RANS |U| is biased low against both.",
  "The files do not say whether a wind direction names where the wind comes from. The cleaned tables read it as the direction the wind comes from (N = 0, E = 90). At NNW a solved field supports that reading: Eddy3D's OpenFOAM 12 run for the wind from NNW correlates R 0.935 with the tunnel's 9 m column labelled NNW and R 0.077 with its column labelled SSE, the opposite wind (clean/QUESTIONS.md QF9); the other directions are not solved and stay unverified."
 ],
 "people": {
  "data_collectors": [
   "K. Fujii, Y. Asami, Y. Iwasa et al. (the original 1978 investigation; the readme names no data collectors)"
  ],
  "editors_distributors": [
   "Yoshihide Tominaga (Niigata Institute of Technology)",
   "Hideki Kikumoto (The University of Tokyo)",
   "Tsubasa Okaze (Institute of Science Tokyo)"
  ],
  "contact": "Tsubasa Okaze <okaze.t.f356@m.isct.ac.jp>"
 },
 "doi": "10.5281/zenodo.15589621",
 "doi_note": null,
 "citation_requested": "Fujii, K., Asami, Y., Iwasa, Y. et al. (1978). Wind in Shinjuku Sub-Central Area — Comparison Between Field Measurement and Wind Tunnel Experiment. Proc. 5th Symposium on Wind Resistance of Structures, 91-98 (in Japanese).",
 "citation": {
  "apa": "Tominaga, Y., Kikumoto, H., & Okaze, T. (2025). AIJ UWE Benchmark Dataset – Case F (Shinjuku): Wind Tunnel Experiment and Field Observation for Flow within an Actual Urban Area in Shinjuku [Data set]. Zenodo. https://doi.org/10.5281/zenodo.15589621",
  "bibtex": "@misc{aijuwe_case_f,\n  author    = \"Tominaga, Yoshihide and Kikumoto, Hideki and Okaze, Tsubasa\",\n  title     = \"{AIJ UWE Benchmark Dataset -- Case F (Shinjuku): Wind Tunnel Experiment and Field Observation for Flow within an Actual Urban Area in Shinjuku}\",\n  year      = \"2025\",\n  publisher = \"Zenodo\",\n  doi       = \"10.5281/zenodo.15589621\",\n  url       = \"https://doi.org/10.5281/zenodo.15589621\",\n  note      = \"Data set\"\n}"
 },
 "files_in_repository": {
  "folder": "https://github.com/Eddy3D-Dev/AIJ-Data-Validation/tree/main/raw/cases/case-f",
  "reference": "raw/cases/case-f/RS-WT_caseF.csv",
  "approach_flow": "raw/cases/case-f/AF_caseF.csv",
  "readme": "raw/cases/case-f/readme_caseF.md"
 },
 "render": "https://aij.eddy3d.com/assets/geometry/case-f.png",
 "page": "https://aij.eddy3d.com/cases/case-f/"
}
