{
 "$schema": "https://aij.eddy3d.com/api/schemas/case.schema.json",
 "schema_version": "2.6.0",
 "data_version": "7ee0afb7cec8197e7edde0e7c282c8e6e9670b7cef003e6aa218c5a536817f48",
 "license": "CC-BY-4.0",
 "id": "J",
 "slug": "case-j",
 "title": "Case J — 1:1:2 building, non-isothermal",
 "summary": "Isolated 1:1:2 building with a floor tracer source in an unstably stratified boundary layer: velocity, temperature, tracer concentration and their turbulent fluxes at 444 points on three planes.",
 "configuration": {
  "building": "1:1:2 (width : depth : height) prism, b = 0.08 m, H = 2b = 0.16 m",
  "b_m": 0.08,
  "H_m": 0.16,
  "Re_H": 16000,
  "U_H_m_s": 1.4581,
  "wind_directions_deg": [
   0
  ],
  "measurement_planes": [
   "vertical centre plane y/H = 0",
   "horizontal z/H = 0.025 (y <= 0 side only)",
   "horizontal z/H = 0.25"
  ],
  "points": 444,
  "stratification": "unstable: heated floor 45.8 degC, air at z = H 12.2 degC (difference 33.6 K), bulk Richardson number -0.086; building surface 22.0 .. 28.9 degC (mean 24.5 degC, 121 points in clean/cases/J/surface_temperature.csv)",
  "source": "5 mm floor outlet at (0.04, 0, 0), 0.25 H beyond the leeward wall; 5 % ethylene in air at 30.4 degC, 9.17e-6 m3/s",
  "concentration_normalisation": "c0 = 0.05 q / (U_H H^2) = 12.283 ppm (the workbook's value; the 5 % gas fraction is in it)",
  "instrument": "split-fibre hot wire (velocity), cold wire (temperature), high-speed hydrocarbon analyser (concentration), 1000 Hz, 120 s per point",
  "tunnel": "thermally stratified wind tunnel, Tokyo Polytechnic University (Atsugi); 1.2 m wide, 1.0 m high",
  "scale_note": "model scale; the sources state no model:full scale ratio"
 },
 "configurations": [
  {
   "config": "default",
   "campaign": "wind_tunnel",
   "instrument": "split_fibre",
   "wind_direction_deg": 0.0,
   "points": 444
  }
 ],
 "quantities": [
  "U",
  "V",
  "W",
  "uu",
  "vv",
  "ww",
  "k",
  "C",
  "c_rms",
  "concentration_ratio",
  "T",
  "T_rms",
  "uT",
  "vT",
  "wT"
 ],
 "units": {
  "length": "m (model scale)",
  "velocity": "m/s",
  "variance": "m^2/s^2",
  "k": "m^2/s^2",
  "concentration": "ppm of the released ethylene",
  "temperature": "degC (T); K (T_rms); heat fluxes K m/s"
 },
 "frame": {
  "origin": "the building's leeward (downwind) wall centre on the ground; x = 0 is the leeward wall",
  "x": "+x streamwise (the wind blows toward +x); the building spans x in [-0.08, 0]; the floor source is at x = +0.04",
  "y": "+y lateral; the building spans y in [-0.04, 0.04]; the z/H = 0.025 plane is measured on the y <= 0 side only",
  "z": "+z up; roof at z = 0.16; heated floor at z = 0",
  "lateral_sign_applied": 1,
  "coordinate_scale_applied": 1.0
 },
 "inflow_fit": {
  "method": "least squares, kappa = 0.41, z = 0.02 .. 2H on AF_caseJ.csv",
  "u_star_m_s": 0.09369,
  "z0_mm": 0.3051,
  "U_H_measured_m_s": 1.46,
  "log_law_error_at_H": "-2.0 %",
  "log_law_rms_residual": "2.1 %",
  "note": "derived during scoping, not published by AIJ; the boundary layer is unstably stratified, so a neutral log law is only a rough description"
 },
 "approach_flow": {
  "source": "raw/cases/case-j/AF_caseJ.csv",
  "units": {
   "z": "m",
   "U": "m/s",
   "k": "m^2/s^2",
   "u_rms": "m/s"
  },
  "rows": [
   {
    "z": 0.003,
    "U": 0.48,
    "k": 0.0319,
    "u_rms": 0.175
   },
   {
    "z": 0.005,
    "U": 0.59,
    "k": 0.0366,
    "u_rms": 0.186
   },
   {
    "z": 0.007,
    "U": 0.63,
    "k": 0.04,
    "u_rms": 0.195
   },
   {
    "z": 0.01,
    "U": 0.69,
    "k": 0.0423,
    "u_rms": 0.213
   },
   {
    "z": 0.015,
    "U": 0.81,
    "k": 0.0419,
    "u_rms": 0.229
   },
   {
    "z": 0.02,
    "U": 0.91,
    "k": 0.0387,
    "u_rms": 0.23
   },
   {
    "z": 0.03,
    "U": 1.05,
    "k": 0.0308,
    "u_rms": 0.21
   },
   {
    "z": 0.04,
    "U": 1.13,
    "k": 0.0279,
    "u_rms": 0.201
   },
   {
    "z": 0.05,
    "U": 1.18,
    "k": 0.0259,
    "u_rms": 0.194
   },
   {
    "z": 0.06,
    "U": 1.21,
    "k": 0.0236,
    "u_rms": 0.183
   },
   {
    "z": 0.07,
    "U": 1.24,
    "k": 0.023,
    "u_rms": 0.182
   },
   {
    "z": 0.08,
    "U": 1.27,
    "k": 0.0213,
    "u_rms": 0.175
   },
   {
    "z": 0.1,
    "U": 1.32,
    "k": 0.0189,
    "u_rms": 0.167
   },
   {
    "z": 0.12,
    "U": 1.38,
    "k": 0.0166,
    "u_rms": 0.156
   },
   {
    "z": 0.14,
    "U": 1.42,
    "k": 0.0142,
    "u_rms": 0.147
   },
   {
    "z": 0.16,
    "U": 1.46,
    "k": 0.0104,
    "u_rms": 0.126
   },
   {
    "z": 0.2,
    "U": 1.52,
    "k": 0.0045,
    "u_rms": 0.079
   },
   {
    "z": 0.24,
    "U": 1.54,
    "k": 0.0017,
    "u_rms": 0.047
   },
   {
    "z": 0.28,
    "U": 1.53,
    "k": 0.0006,
    "u_rms": 0.028
   },
   {
    "z": 0.32,
    "U": 1.52,
    "k": 0.0004,
    "u_rms": 0.023
   }
  ],
  "csv": {
   "url": "https://aij.eddy3d.com/api/cases/J/approach_flow.csv?v=076668c06f1c",
   "path": "cases/J/approach_flow.csv",
   "media_type": "text/csv",
   "bytes": 469,
   "sha256": "076668c06f1c98252006e9d9aaa100ca106ab3a4766565012e12ee4948dd5198"
  }
 },
 "inflow": {
  "benchmark_data": {
   "approach_flow_csv": {
    "url": "https://aij.eddy3d.com/api/cases/J/approach_flow.csv?v=076668c06f1c",
    "path": "cases/J/approach_flow.csv",
    "media_type": "text/csv",
    "bytes": 469,
    "sha256": "076668c06f1c98252006e9d9aaa100ca106ab3a4766565012e12ee4948dd5198"
   },
   "columns": [
    "z",
    "U",
    "k",
    "u_rms"
   ],
   "units": {
    "z": "m",
    "U": "m/s",
    "k": "m^2/s^2",
    "u_rms": "m/s"
   },
   "rows": 20,
   "fit": {
    "method": "least squares, kappa = 0.41, z = 0.02 .. 2H on AF_caseJ.csv",
    "u_star_m_s": 0.09369,
    "z0_mm": 0.3051,
    "U_H_measured_m_s": 1.46,
    "log_law_error_at_H": "-2.0 %",
    "log_law_rms_residual": "2.1 %",
    "note": "derived during scoping, not published by AIJ; the boundary layer is unstably stratified, so a neutral log law is only a rough description"
   },
   "note": "the measured profile and the fit of it are the benchmark's data as cleaned here; everything under `recommended` is a choice"
  },
  "recommended": {
   "status": "RECOMMENDED by this repository (not part of the benchmark): a log-law inlet fitted to the case's own approach-flow file, with k and epsilon from the standard neutral ABL relations. Any inlet may be submitted; say which in submission.yaml",
   "profile": "U(z) = u*/kappa ln((z + z0)/z0); k = u*^2 / sqrt(Cmu); epsilon = u*^3 / (kappa (z + z0))",
   "u_star_m_s": 0.09369,
   "z0_m": 0.0003051,
   "kappa": 0.41,
   "Cmu": 0.09,
   "k_m2_s2": 0.029259386999999998,
   "fit": "least squares, kappa = 0.41, z = 0.02 .. 2H on AF_caseJ.csv",
   "U_ref_m_s": 1.4581,
   "z_ref_m": 0.16,
   "openfoam": "atmBoundaryLayerInletVelocity / atmBoundaryLayerInletK / atmBoundaryLayerInletEpsilon with Uref, Zref, z0 and d = 0; nutkAtmRoughWallFunction with the same z0 on the ground: cases/{id}/inflow_openfoam.txt holds them"
  },
  "flow_direction": {
   "convention": "along_x",
   "meaning": "+x is along the wind at WD = 0: flowDir (1 0 0); another WD rotates it about +z by the case's rotation sense (frame.wind_direction_rotation)",
   "wind_directions_deg": [
    0.0
   ]
  },
  "eddy3d_runs": [
   {
    "run_id": "J.umf-realizableKE",
    "engine": "umf-realizableKE",
    "scale": 62.5,
    "airCells": 236408,
    "froudeScale": 62.5,
    "UhModel": 11.527292640728785,
    "UhTunnel": 1.4581,
    "sceneUh": 11.527292640728785
   },
   {
    "run_id": "J.umf-buoyantKEpsilon",
    "engine": "umf-buoyantKEpsilon",
    "scale": 62.5,
    "airCells": 236408,
    "froudeScale": 62.5,
    "UhModel": 11.527292640728785,
    "UhTunnel": 1.4581,
    "sceneUh": 11.527292640728785
   }
  ],
  "domain": "the extents, blockage and cell sizes of Eddy3D's domains are not in its snapshots and are not stated here; mesh.cells and the scale are, where the snapshot has them"
 },
 "points": {
  "url": "https://aij.eddy3d.com/api/cases/J/points.json",
  "csv": {
   "url": "https://aij.eddy3d.com/api/cases/J/points.csv?v=444b7aaa1791",
   "path": "cases/J/points.csv",
   "media_type": "text/csv",
   "bytes": 99060,
   "sha256": "444b7aaa179115570e89110e2da80564c0469437de7be787adee53c3047aef6c"
  },
  "source": "clean/cases/J/points.csv",
  "rows": 444,
  "distinct_points": 444,
  "columns": [
   "point_id",
   "config",
   "instrument",
   "wind_direction_deg",
   "x",
   "y",
   "z",
   "U",
   "V",
   "W",
   "uu",
   "vv",
   "ww",
   "k",
   "campaign",
   "C",
   "c_rms",
   "concentration_ratio",
   "T",
   "T_rms",
   "uT",
   "vT",
   "wT"
  ],
  "counts": {
   "config": {
    "default": 444
   },
   "instrument": {
    "split_fibre": 444
   },
   "wind_direction_deg": {
    "0.0": 444
   }
  },
  "nulls": {},
  "bbox_min": [
   -0.16,
   -0.16,
   0.004
  ],
  "bbox_max": [
   0.32,
   0.16,
   0.28
  ]
 },
 "probes": {
  "csv": {
   "url": "https://aij.eddy3d.com/api/cases/J/probes.csv?v=da4854c6791c",
   "path": "cases/J/probes.csv",
   "media_type": "text/csv",
   "bytes": 37058,
   "sha256": "da4854c6791c40676d7851fc1f091d57323bf99a17f60c4c9841fcdc2f680224"
  },
  "rows": 444,
  "columns": [
   "point_id",
   "config",
   "campaign",
   "instrument",
   "run",
   "wind_direction_deg",
   "x",
   "y",
   "z",
   "scored_as"
  ],
  "columns_meaning": "the key columns of a scored file (point_id with config, campaign, instrument, run and wind_direction_deg as the case has them), x, y, z in m (case frame), and scored_as: the families the row is scored in (vector, k, thermistor_bracket, concentration, theta, joined by +)"
 },
 "scoring": {
  "U_ref_m_s": 1.4581,
  "U_ref_meaning": "U_H, the approach speed at the building height (the tunnel's units)",
  "theta": {
   "T_floor_degC": 45.80000000000001,
   "delta_T_K": 33.629999999999995,
   "meaning": "T_floor = 318.95 K, T_H = 285.32 K (the approach air at the building height)"
  },
  "scored_as": {
   "vector": "U, V, W and the speed |U| against the split-fibre, LDV or hot-wire components (velocity.U, velocity.V, velocity.W, speed)",
   "k": "the turbulent kinetic energy (k)",
   "thermistor_bracket": "a mean scalar speed (thermistor, cup or sonic anemometer) against |U| (vs.vector) and sqrt(|U|^2 + 2k) (vs.scalar)",
   "concentration": "the dimensionless concentration c* = C/c0 (cstar)",
   "theta": "the floor-referenced temperature fraction (theta)"
  },
  "value_columns": [
   "U",
   "V",
   "W",
   "speed",
   "k",
   "cstar",
   "theta",
   "T"
  ],
  "key_columns": [
   "config",
   "campaign",
   "instrument",
   "run",
   "wind_direction_deg",
   "point_id"
  ],
  "conventions": "velocities and the speed over U_ref, k over U_ref^2 (Cases E, F and G publish ratios already); U, V, W, |U| and the thermistor bracket scored as signed velocities (FAC2's ratio keeps the sign; hit rate D = 0.25, W = 0.05); k by the plain definitions (D = 0.25 only); a thermistor, cup or sonic reading (a mean scalar speed) scored against |U| (vs.vector) and sqrt(|U|^2 + 2k) (vs.scalar), the two ends of its bracket; c* = C/c0 with one detection limit per case, 1e-3 of the largest measured value; theta = (T_floor - T)/(T_floor - T_H) scored like a positive velocity. The same conventions score the served Eddy3D results (docs/validation/method.md).",
  "tool": "uv run python validation/score_submissions.py <folder>, from a checkout of the repository (pyproject.toml)",
  "metric_meaning": {
   "Count": "number of measured points scored",
   "MeanObserved": "mean of the measured, normalised quantity",
   "MeanPredicted": "mean of the modelled, normalised quantity",
   "Fb": "fractional bias, 2 (mean_obs - mean_pred) / (mean_obs + mean_pred); positive = model low",
   "Nmse": "normalised mean square error",
   "Nad": "normalised absolute difference",
   "Fac2": "fraction of points within a factor of two (harsh near zero for sign-changing V and W)",
   "HitRate": "fraction of points within D = 0.25 relative or W = 0.05 U_H absolute",
   "Mg": "geometric mean bias",
   "Vg": "geometric variance",
   "GeometricPairs": "pairs with both values positive (used for Mg/Vg)",
   "R": "Pearson correlation coefficient",
   "null": "a metric that is undefined for the data (for example Mg and Vg when no pair has both values positive; Fb, Nmse and Nad of a signed velocity component of Case H or I whose observed and predicted means are not both positive)"
  }
 },
 "geometry": {
  "url": "https://aij.eddy3d.com/api/cases/J/geometry.json",
  "files": [
   {
    "configuration": "default",
    "url": "https://aij.eddy3d.com/api/cases/J/geometry.stl?v=1bd33d8d3531",
    "triangles": 12,
    "watertight": true
   }
  ]
 },
 "validation": {
  "url": "https://aij.eddy3d.com/api/cases/J/validation.json",
  "status": "scored",
  "engines": {
   "openfoam12-realizableKE": "pending",
   "umf-realizableKE": "scored",
   "umf-buoyantKEpsilon": "scored",
   "openlb": "pending",
   "fluidx3d": "pending",
   "ml-surrogate": "pending"
  }
 },
 "known_issues": [
  "Temperature is in KELVIN in all three published CSVs; the API serves degrees Celsius (T) and kelvin differences (T_rms, heat fluxes).",
  "The published CSV is the legacy workbook's non-dimensional values rounded to 3-4 decimals and scaled back; the table is rebuilt from the workbook. The CSV's heat fluxes sit on a 0.0049 K m/s grid and k on 0.00021 m^2/s^2.",
  "c0 = 12.283 ppm includes the 5 % ethylene fraction of the released gas (workbook cell Co); q / (U_H H^2) alone is 245.7 ppm. The data paper states no c0 for Case J.",
  "RS_caseJ.csv lists the location (-0.16, 0, 0.004) twice (No. 1 and 153, identical values): a score over the table counts that point twice.",
  "The workbook's <u'2> is not always the square of its sigma_u (up to 3 % in single rows); the table uses the variances, which reproduce k.",
  "The workbook lists an expanded uncertainty beside every quantity (no column here; clean/manifest.json cases.J.extra_measurements.expanded_uncertainty). The mean concentration is below its own uncertainty (about 1 ppm) at 42 % of the rows, and 193 uncertainty cells of the w'theta' flux are an Excel fill series, not values.",
  "The empty-tunnel profile changes along the tunnel: U at z = 0.019 H is 0.33 U_H at x/H = -2.5 (the published AF_caseJ.csv), 0.58 at the building's own position. The workbook has all three stations (clean/cases/J/approach_flow_full.csv).",
  "The +y and -y halves are not mirror images: over the 97 mirror pairs of the z/H = 0.25 plane U at +y is 11 % lower (means 0.558 and 0.629 U_H, R between the halves 0.955), so a y-symmetric model has a ceiling on this file.",
  "The readme's Reynolds number (43,000) is Case H's; U_H H / nu = 1.6e4 as the data paper states.",
  "uv, uw, vw are not published at the points; uc, vc, wc were not measured."
 ],
 "people": {
  "data_collectors": [
   "Ryuichiro Yoshie (Tokyo Polytechnic University)",
   "Hideyuki Tanaka (Takenaka Corporation)",
   "Tsuyoshi Kobayashi (Tokyo Polytechnic University)"
  ],
  "editors_distributors": [
   "Yoshihide Tominaga (Niigata Institute of Technology)",
   "Hideki Kikumoto (The University of Tokyo)",
   "Tsubasa Okaze (Institute of Science Tokyo)"
  ],
  "contact": "Ryuichiro Yoshie <yoshie@arch.t-kougei.ac.jp>"
 },
 "doi": "10.5281/zenodo.15447887",
 "doi_note": null,
 "citation_requested": "Yoshie, R. (2016). Wind Tunnel Experiment and Large Eddy Simulation of Pollutant/Thermal Dispersion in Non-isothermal Turbulent Boundary Layer. Adv Environ Wind Eng, 167-196. https://doi.org/10.1007/978-4-431-55912-2_9",
 "citation": {
  "apa": "Yoshie, R., Tanaka, H., Kobayashi, T., Tominaga, Y., Kikumoto, H., & Okaze, T. (2025). AIJ UWE Benchmark Dataset – Case J (112CT): Wind Tunnel Experiment for Flow and Dispersion Around a 1:1:2 Shape Building Model under Non-isothermal Conditions [Data set]. Zenodo. https://doi.org/10.5281/zenodo.15447887",
  "bibtex": "@misc{aijuwe_case_j,\n  author    = \"Yoshie, Ryuichiro and Tanaka, Hideyuki and Kobayashi, Tsuyoshi and Tominaga, Yoshihide and Kikumoto, Hideki and Okaze, Tsubasa\",\n  title     = \"{AIJ UWE Benchmark Dataset -- Case J (112CT): Wind Tunnel Experiment for Flow and Dispersion Around a 1:1:2 Shape Building Model under Non-isothermal Conditions}\",\n  year      = \"2025\",\n  publisher = \"Zenodo\",\n  doi       = \"10.5281/zenodo.15447887\",\n  url       = \"https://doi.org/10.5281/zenodo.15447887\",\n  note      = \"Data set\"\n}"
 },
 "files_in_repository": {
  "folder": "https://github.com/Eddy3D-Dev/AIJ-Data-Validation/tree/main/raw/cases/case-j",
  "reference": "raw/cases/case-j/RS_caseJ.csv",
  "approach_flow": "raw/cases/case-j/AF_caseJ.csv",
  "readme": "raw/cases/case-j/readme_caseJ.md"
 },
 "render": "https://aij.eddy3d.com/assets/geometry/case-j.png",
 "page": "https://aij.eddy3d.com/cases/case-j/"
}
