{
 "$schema": "https://aij.eddy3d.com/api/schemas/case.schema.json",
 "schema_version": "2.6.0",
 "data_version": "7ee0afb7cec8197e7edde0e7c282c8e6e9670b7cef003e6aa218c5a536817f48",
 "license": "CC-BY-4.0",
 "id": "L",
 "slug": "case-l",
 "title": "Case L — 9 x 14 cube array, line source, non-isothermal",
 "summary": "14 rows by 9 columns of 0.06 m cubes with a tracer line source on the floor across the tunnel, in an unstably stratified boundary layer: velocity, temperature, concentration and their fluxes at 344 points in the streets and over the roofs.",
 "configuration": {
  "array": "14 rows (along x) by 9 columns (across y) of cubes, H = 0.06 m, pitch 0.12 m (street width = H, plan area ratio 25 %), published as BD_caseL.stl; the data paper calls it '9 rows by 14 columns'",
  "H_m": 0.06,
  "pitch_m": 0.12,
  "cubes": 126,
  "Re_H": 5600,
  "U_H_m_s": 1.339415,
  "wind_directions_deg": [
   0
  ],
  "measurement_planes": [
   "8 heights (4 .. 150 mm) at 27 locations in the streets near the source",
   "4 heights (70 .. 150 mm) at 14 locations above the blocks",
   "3 heights (4 .. 30 mm) at 24 locations around"
  ],
  "points": 344,
  "stratification": "unstable: floor 45.0 degC, air at z = H 14.75 degC (difference 30.3 K), bulk Richardson number -0.035 (workbook; the readme says -0.04); the workbook gives the building surface as 42.2 degC",
  "source": "floor line source across the tunnel at x = -0.15 m between rows 7 and 8: readme 0.037 m x 1.2 m, BD_caseL.stl patch 0.04 m x 1.02 m; 100 % ethylene, 8.33e-6 m3/s (500 cc/min) at 35 degC",
  "concentration_normalisation": "c0 = q / (U_H H^2) = 1728.23 ppm (the workbook's value)",
  "instrument": "split-fibre hot wire (velocity), cold wire (temperature), high-speed hydrocarbon analyser (concentration), 1000 Hz with a 200 Hz low-pass filter, 60 s per point",
  "tunnel": "thermally stratified wind tunnel, Tokyo Polytechnic University (Atsugi); 1.2 m wide, 1.0 m high; 26 aluminium angles 9 mm high every 200 mm as roughness; model floor 10 mm above the tunnel floor",
  "scale_note": "model scale; the sources state no model:full scale ratio"
 },
 "configurations": [
  {
   "config": "default",
   "campaign": "wind_tunnel",
   "instrument": "split_fibre",
   "wind_direction_deg": 0.0,
   "points": 344
  }
 ],
 "quantities": [
  "U",
  "V",
  "W",
  "uu",
  "vv",
  "ww",
  "k",
  "uv",
  "uw",
  "C",
  "c_rms",
  "concentration_ratio",
  "T",
  "T_rms",
  "uc",
  "vc",
  "wc",
  "uT",
  "vT",
  "wT"
 ],
 "units": {
  "length": "m (model scale)",
  "velocity": "m/s",
  "variance": "m^2/s^2",
  "k": "m^2/s^2",
  "concentration": "ppm of the released ethylene",
  "temperature": "degC (T); K (T_rms); heat fluxes K m/s; concentration fluxes ppm m/s"
 },
 "frame": {
  "origin": "bottom centre of the windward wall of the 9th row (of 14) of the central column: x = 0 is that wall, y = 0 the centre line of the central column",
  "x": "+x streamwise (the wind blows toward +x); row k spans x in [0.12 (k-9), 0.12 (k-9) + 0.06], so the array spans x in [-0.96, 0.66]",
  "y": "+y lateral; column centres at y = 0, +-0.12, ... +-0.48 (the array spans y in [-0.51, 0.51])",
  "z": "+z up from the model floor; cube tops at z = 0.06; heated floor at z = 0",
  "lateral_sign_applied": 1,
  "coordinate_scale_applied": 1.0
 },
 "inflow_fit": {
  "method": "least squares, kappa = 0.41, z = 0.02 .. 0.32 m (about 5 H) on the workbook's Inflow sheet (CSV = its rounding)",
  "u_star_m_s": 0.06999,
  "z0_mm": 0.0265,
  "U_H_measured_m_s": 1.3394,
  "log_law_error_at_H": "-1.6 %",
  "log_law_rms_residual": "2.2 %",
  "note": "derived during scoping, not published by AIJ; the boundary layer is unstably stratified, so a neutral log law is only a rough description"
 },
 "approach_flow": {
  "source": "raw/cases/case-l/AF_caseL.csv",
  "units": {
   "z": "m",
   "U": "m/s",
   "u_rms": "m/s"
  },
  "rows": [
   {
    "z": 0.003,
    "U": 0.64,
    "u_rms": 0.197
   },
   {
    "z": 0.004,
    "U": 0.69,
    "u_rms": 0.196
   },
   {
    "z": 0.005,
    "U": 0.72,
    "u_rms": 0.201
   },
   {
    "z": 0.007,
    "U": 0.76,
    "u_rms": 0.21
   },
   {
    "z": 0.01,
    "U": 0.84,
    "u_rms": 0.228
   },
   {
    "z": 0.015,
    "U": 0.95,
    "u_rms": 0.236
   },
   {
    "z": 0.02,
    "U": 1.06,
    "u_rms": 0.229
   },
   {
    "z": 0.03,
    "U": 1.18,
    "u_rms": 0.207
   },
   {
    "z": 0.04,
    "U": 1.26,
    "u_rms": 0.189
   },
   {
    "z": 0.05,
    "U": 1.29,
    "u_rms": 0.184
   },
   {
    "z": 0.06,
    "U": 1.34,
    "u_rms": 0.173
   },
   {
    "z": 0.07,
    "U": 1.36,
    "u_rms": 0.162
   },
   {
    "z": 0.08,
    "U": 1.38,
    "u_rms": 0.152
   },
   {
    "z": 0.09,
    "U": 1.4,
    "u_rms": 0.147
   },
   {
    "z": 0.1,
    "U": 1.42,
    "u_rms": 0.141
   },
   {
    "z": 0.11,
    "U": 1.44,
    "u_rms": 0.134
   },
   {
    "z": 0.12,
    "U": 1.45,
    "u_rms": 0.133
   },
   {
    "z": 0.13,
    "U": 1.46,
    "u_rms": 0.127
   },
   {
    "z": 0.14,
    "U": 1.48,
    "u_rms": 0.12
   },
   {
    "z": 0.15,
    "U": 1.49,
    "u_rms": 0.112
   },
   {
    "z": 0.16,
    "U": 1.51,
    "u_rms": 0.1
   },
   {
    "z": 0.2,
    "U": 1.54,
    "u_rms": 0.06
   },
   {
    "z": 0.24,
    "U": 1.55,
    "u_rms": 0.035
   },
   {
    "z": 0.28,
    "U": 1.54,
    "u_rms": 0.024
   },
   {
    "z": 0.32,
    "U": 1.52,
    "u_rms": 0.02
   }
  ],
  "csv": {
   "url": "https://aij.eddy3d.com/api/cases/L/approach_flow.csv?v=c428993827d4",
   "path": "cases/L/approach_flow.csv",
   "media_type": "text/csv",
   "bytes": 406,
   "sha256": "c428993827d4593111756048f761c0d8c1308bc5d35f33130a8676c34a80b077"
  }
 },
 "inflow": {
  "benchmark_data": {
   "approach_flow_csv": {
    "url": "https://aij.eddy3d.com/api/cases/L/approach_flow.csv?v=c428993827d4",
    "path": "cases/L/approach_flow.csv",
    "media_type": "text/csv",
    "bytes": 406,
    "sha256": "c428993827d4593111756048f761c0d8c1308bc5d35f33130a8676c34a80b077"
   },
   "columns": [
    "z",
    "U",
    "u_rms"
   ],
   "units": {
    "z": "m",
    "U": "m/s",
    "u_rms": "m/s"
   },
   "rows": 25,
   "fit": {
    "method": "least squares, kappa = 0.41, z = 0.02 .. 0.32 m (about 5 H) on the workbook's Inflow sheet (CSV = its rounding)",
    "u_star_m_s": 0.06999,
    "z0_mm": 0.0265,
    "U_H_measured_m_s": 1.3394,
    "log_law_error_at_H": "-1.6 %",
    "log_law_rms_residual": "2.2 %",
    "note": "derived during scoping, not published by AIJ; the boundary layer is unstably stratified, so a neutral log law is only a rough description"
   },
   "note": "the measured profile and the fit of it are the benchmark's data as cleaned here; everything under `recommended` is a choice"
  },
  "recommended": {
   "status": "RECOMMENDED by this repository (not part of the benchmark): a log-law inlet fitted to the case's own approach-flow file, with k and epsilon from the standard neutral ABL relations. Any inlet may be submitted; say which in submission.yaml",
   "profile": "U(z) = u*/kappa ln((z + z0)/z0); k = u*^2 / sqrt(Cmu); epsilon = u*^3 / (kappa (z + z0))",
   "u_star_m_s": 0.06999,
   "z0_m": 2.65e-05,
   "kappa": 0.41,
   "Cmu": 0.09,
   "k_m2_s2": 0.016328667,
   "fit": "least squares, kappa = 0.41, z = 0.02 .. 0.32 m (about 5 H) on the workbook's Inflow sheet (CSV = its rounding)",
   "U_ref_m_s": 1.339415,
   "z_ref_m": 0.06,
   "openfoam": "atmBoundaryLayerInletVelocity / atmBoundaryLayerInletK / atmBoundaryLayerInletEpsilon with Uref, Zref, z0 and d = 0; nutkAtmRoughWallFunction with the same z0 on the ground: cases/{id}/inflow_openfoam.txt holds them"
  },
  "flow_direction": {
   "convention": "along_x",
   "meaning": "+x is along the wind at WD = 0: flowDir (1 0 0); another WD rotates it about +z by the case's rotation sense (frame.wind_direction_rotation)",
   "wind_directions_deg": [
    0.0
   ]
  },
  "eddy3d_runs": [
   {
    "run_id": "L.umf-realizableKE",
    "engine": "umf-realizableKE",
    "scale": 100.0,
    "UhModel": 13.39415,
    "UhTunnel": 1.339415
   }
  ],
  "domain": "the extents, blockage and cell sizes of Eddy3D's domains are not in its snapshots and are not stated here; mesh.cells and the scale are, where the snapshot has them"
 },
 "points": {
  "url": "https://aij.eddy3d.com/api/cases/L/points.json",
  "csv": {
   "url": "https://aij.eddy3d.com/api/cases/L/points.csv?v=b575fe11d107",
   "path": "cases/L/points.csv",
   "media_type": "text/csv",
   "bytes": 94162,
   "sha256": "b575fe11d107f31aacb2052bb31783d90964d5f90068fc5d8a8566f1004ef1f7"
  },
  "source": "clean/cases/L/points.csv",
  "rows": 344,
  "distinct_points": 344,
  "columns": [
   "point_id",
   "config",
   "instrument",
   "wind_direction_deg",
   "x",
   "y",
   "z",
   "U",
   "V",
   "W",
   "uu",
   "vv",
   "ww",
   "k",
   "campaign",
   "uv",
   "uw",
   "C",
   "c_rms",
   "concentration_ratio",
   "T",
   "T_rms",
   "uc",
   "vc",
   "wc",
   "uT",
   "vT",
   "wT"
  ],
  "counts": {
   "config": {
    "default": 344
   },
   "instrument": {
    "split_fibre": 344
   },
   "wind_direction_deg": {
    "0.0": 344
   }
  },
  "nulls": {},
  "bbox_min": [
   -0.21,
   -0.18,
   0.004
  ],
  "bbox_max": [
   0.39,
   0.18,
   0.15
  ]
 },
 "probes": {
  "csv": {
   "url": "https://aij.eddy3d.com/api/cases/L/probes.csv?v=abee3cd8c088",
   "path": "cases/L/probes.csv",
   "media_type": "text/csv",
   "bytes": 28823,
   "sha256": "abee3cd8c0886634b6b733d8fc95aceb84045d4aba2b6faa9e7a8435bc4dfef2"
  },
  "rows": 344,
  "columns": [
   "point_id",
   "config",
   "campaign",
   "instrument",
   "run",
   "wind_direction_deg",
   "x",
   "y",
   "z",
   "scored_as"
  ],
  "columns_meaning": "the key columns of a scored file (point_id with config, campaign, instrument, run and wind_direction_deg as the case has them), x, y, z in m (case frame), and scored_as: the families the row is scored in (vector, k, thermistor_bracket, concentration, theta, joined by +)"
 },
 "scoring": {
  "U_ref_m_s": 1.339415,
  "U_ref_meaning": "U_H, the approach speed at the cube height (the tunnel's units)",
  "theta": {
   "T_floor_degC": 45.00911894996781,
   "delta_T_K": 30.25673172774559,
   "meaning": "T_floor = 45.01 degC, T_floor - T_H = 30.26 K (the workbook's values at full precision)"
  },
  "scored_as": {
   "vector": "U, V, W and the speed |U| against the split-fibre, LDV or hot-wire components (velocity.U, velocity.V, velocity.W, speed)",
   "k": "the turbulent kinetic energy (k)",
   "thermistor_bracket": "a mean scalar speed (thermistor, cup or sonic anemometer) against |U| (vs.vector) and sqrt(|U|^2 + 2k) (vs.scalar)",
   "concentration": "the dimensionless concentration c* = C/c0 (cstar)",
   "theta": "the floor-referenced temperature fraction (theta)"
  },
  "value_columns": [
   "U",
   "V",
   "W",
   "speed",
   "k",
   "cstar",
   "theta",
   "T"
  ],
  "key_columns": [
   "config",
   "campaign",
   "instrument",
   "run",
   "wind_direction_deg",
   "point_id"
  ],
  "conventions": "velocities and the speed over U_ref, k over U_ref^2 (Cases E, F and G publish ratios already); U, V, W, |U| and the thermistor bracket scored as signed velocities (FAC2's ratio keeps the sign; hit rate D = 0.25, W = 0.05); k by the plain definitions (D = 0.25 only); a thermistor, cup or sonic reading (a mean scalar speed) scored against |U| (vs.vector) and sqrt(|U|^2 + 2k) (vs.scalar), the two ends of its bracket; c* = C/c0 with one detection limit per case, 1e-3 of the largest measured value; theta = (T_floor - T)/(T_floor - T_H) scored like a positive velocity. The same conventions score the served Eddy3D results (docs/validation/method.md).",
  "tool": "uv run python validation/score_submissions.py <folder>, from a checkout of the repository (pyproject.toml)",
  "metric_meaning": {
   "Count": "number of measured points scored",
   "MeanObserved": "mean of the measured, normalised quantity",
   "MeanPredicted": "mean of the modelled, normalised quantity",
   "Fb": "fractional bias, 2 (mean_obs - mean_pred) / (mean_obs + mean_pred); positive = model low",
   "Nmse": "normalised mean square error",
   "Nad": "normalised absolute difference",
   "Fac2": "fraction of points within a factor of two (harsh near zero for sign-changing V and W)",
   "HitRate": "fraction of points within D = 0.25 relative or W = 0.05 U_H absolute",
   "Mg": "geometric mean bias",
   "Vg": "geometric variance",
   "GeometricPairs": "pairs with both values positive (used for Mg/Vg)",
   "R": "Pearson correlation coefficient",
   "null": "a metric that is undefined for the data (for example Mg and Vg when no pair has both values positive; Fb, Nmse and Nad of a signed velocity component of Case H or I whose observed and predicted means are not both positive)"
  }
 },
 "geometry": {
  "url": "https://aij.eddy3d.com/api/cases/L/geometry.json",
  "files": [
   {
    "configuration": "default",
    "url": "https://aij.eddy3d.com/api/cases/L/geometry.stl?v=20864bc75187",
    "triangles": 1512,
    "watertight": true
   }
  ]
 },
 "validation": {
  "url": "https://aij.eddy3d.com/api/cases/L/validation.json",
  "status": "scored",
  "engines": {
   "openfoam12-realizableKE": "pending",
   "umf-realizableKE": "scored",
   "openlb": "pending",
   "fluidx3d": "pending",
   "ml-surrogate": "pending"
  }
 },
 "known_issues": [
  "RS_caseL.csv's temperature column is headed 'T(K)' but holds DEGREES CELSIUS (12.85 .. 29.86); AF_caseL.csv's 'T(K)' is kelvin (283 .. 295). The API serves degrees Celsius for both.",
  "The published CSV is the workbook rounded to 2-4 decimals; the table is rebuilt from the workbook. Its 'tc' column (temperature-concentration covariance, K ppm) and the workbook's 'Usc' (the vector magnitude of the mean velocity) are not in the table.",
  "BD_caseL.stl: the two bottom triangles (z = 0) of each of the 126 cubes (252 triangles) are wound inward; the served geometry.stl is the 126 boxes, outward.",
  "The readme's file list names AF_caseK.csv and RS_caseK.csv; the files are AF_caseL.csv and RS_caseL.csv.",
  "The readme's 'building surface temperature T_b = 14.8 degC' is the approach-flow air temperature at z = H; the workbook gives the building surface as 42.2 degC.",
  "The line source is 0.037 m x 1.2 m in the readme and data paper but a 0.04 m x 1.02 m patch in BD_caseL.stl.",
  "The +y and -y halves are not mirror images: the same point differs in U by 26 %, in k by 23 %, in C by 36 % on average, and U is 0.11 m/s lower and T 1.3 K higher at +y at z = 0.15 m (0.09 m above the roofs), so the tunnel flow has a lateral gradient; do not assume symmetry.",
  "The workbook carries no expanded uncertainty (the data paper mentions one for Case J only).",
  "AF_caseL.csv lists the profile from the top (z = 0.32 m) down and has no k.",
  "The measured tracer flux through the cross-sections equals q / 1.2 m to 0.86 .. 1.0 (street and cube-column lines averaged), which fixes q and the unit ppm; the cube-column line alone carries only 0.2 .. 0.4 of it."
 ],
 "people": {
  "data_collectors": [
   "Ryuichiro Yoshie (Tokyo Polytechnic University)",
   "Koudai Katada (Tokyo Polytechnic University)"
  ],
  "editors_distributors": [
   "Yoshihide Tominaga (Niigata Institute of Technology)",
   "Hideki Kikumoto (The University of Tokyo)",
   "Tsubasa Okaze (Institute of Science Tokyo)"
  ],
  "contact": "Ryuichiro Yoshie <yoshie@arch.t-kougei.ac.jp>"
 },
 "doi": "10.5281/zenodo.15487637",
 "doi_note": null,
 "citation_requested": "Yoshie, R., Nomura, K., Katada, K., Jiang, G. (2012). Non-isothermal large eddy simulation of pollutant and thermal dispersion in urban street canyons. 22nd National Symposium on Wind Engineering, 61-66 (in Japanese). https://doi.org/10.14887/kazekosymp.22.0.61.0; Jiang, G., Yoshie, R. (2018). Large-eddy simulation of flow and pollutant dispersion in a 3D urban street model located in an unstable boundary layer. Build. Environ. 142, 47-57. https://doi.org/10.1016/j.buildenv.2018.06.015",
 "citation": {
  "apa": "Yoshie, R., Katada, K., Tominaga, Y., Kikumoto, H., & Okaze, T. (2025). AIJ UWE Benchmark Dataset – Case L (ArraysCT): Wind Tunnel Experiment for Flow and Dispersion around Cube Arrays with a Line-source under Non-isothermal Conditions [Data set]. Zenodo. https://doi.org/10.5281/zenodo.15487637",
  "bibtex": "@misc{aijuwe_case_l,\n  author    = \"Yoshie, Ryuichiro and Katada, Koudai and Tominaga, Yoshihide and Kikumoto, Hideki and Okaze, Tsubasa\",\n  title     = \"{AIJ UWE Benchmark Dataset -- Case L (ArraysCT): Wind Tunnel Experiment for Flow and Dispersion around Cube Arrays with a Line-source under Non-isothermal Conditions}\",\n  year      = \"2025\",\n  publisher = \"Zenodo\",\n  doi       = \"10.5281/zenodo.15487637\",\n  url       = \"https://doi.org/10.5281/zenodo.15487637\",\n  note      = \"Data set\"\n}"
 },
 "files_in_repository": {
  "folder": "https://github.com/Eddy3D-Dev/AIJ-Data-Validation/tree/main/raw/cases/case-l",
  "reference": "raw/cases/case-l/RS_caseL.csv",
  "approach_flow": "raw/cases/case-l/AF_caseL.csv",
  "readme": "raw/cases/case-l/readme_caseL.md"
 },
 "render": "https://aij.eddy3d.com/assets/geometry/case-l.png",
 "page": "https://aij.eddy3d.com/cases/case-l/"
}
